HOGWILD

http://www.benelliusa.com/forum/search.php?searchid=126170&pp=25 find one of tuckers swap post, i am sure there are several on this thread that explains it in great detail! also has a great cleaning tutorial which can be found with a search!!

as long as it's made for a smooth bore and not a sabot it should be fine as long as you meet the minimum charge to cycle the shotgun which being an ARGO shotgun it should be no problem! try page 63 http://www.militec.com/firearms/manual.html

http://www.benelliusa.com/customer-service/pdfs/M4Super90.pdf page 48 ,3 notches is Modified choke

sounds like a spring issue? was gun firinig ok and then just started FTF or had gun been cleaned and then problem started? http://www.benelliusa.com/customer-service/troubleshooting.tpl sounds like something did not get put back together just rite ya probably allready tried the troubleshooting tree but i linked it just in case

http://www.e-gunparts.com/basket.asp they have wooden forends but twice the price as the rearends?? you can take your pick from what they have and give them a call

Lack of competition!!

It would drag the ground being the diameter of the WSM Cartridge and that would be a safety hazard!

Duck Commander Family is using them and i am sure if they were junk they would not use them much less let someone put their stamp of approval on them!

tyr some Hoppes Solvent, then CLP or Militec-1, use no solvent on outside of shotgun, use the militec-1 on outside and wipe it dry with lint free cloth=old draws!!

ever thought about sending it in for warranty repair?

This one can support numerous clipts!

Birdman:D ? Dr. maybe both

Gunsmith would be a start? GL, lotta people have issues with choke tubes due to not knowing how to care for a gun with them. When ya are not actually shooting ya need to unload torque on tube to keep this from happening and a 3.00 tube of choke lube also works well when ya use it! stuck choke should not cost too much but any trip to a smith could be costly! The tool they use to remove one is a little over 100.00 bucks and not real sure what a decent price would be but it being an expensive Benelli and the availability of new barrel will probably run the removal price up a little? Gander Mountain, Briley Manufacturing can get them out but you can probably find a local smith that can get it out!! http://www.gunnersden.com/index.htm.gunsmiths.html

looks like the front end has a lip on it that fits into front end of stock so i would suppose ya just lift up on the back and slide it aft? probably needs a firm tug upward?

Not many normal Gun Shops going to carry such an item! I would go to where ya bought it and order one or call C/S for location of clips #094P

http://www.briley.com/index.asp?PageAction=VIEWCATS&Category=204 call these guys they might be able to help? I would think any Gunsmith could tell you if it was possible to solve your issues!

http://www.speedshooter.com/product_detail.cfm?ID=BEN018-022 try here? http://www.davesmetalworks.com/ben.html or just go to here and see what they got? GL!

Benelli's need to be broken in with heavy field loads or heavier, not low brass field loads. This will cause issues and why would ya wait till ya need to shoot some 3.5" shells to see if it will malfunction again? Just take some 3" shells and run them thru before deer season on a pattern board and see if that does not fix the malfunction, it will also tell you where your shells you will be using for deer are patterning! POI!

no problem and good luck on finding one ya like, sounds like a nice pistol and deserves a quality holster!! yours have laser grips?

what have you done to clean it and what chemicals were used? barrel obstructions from what i understand do not have to be big to cause problems and if a good solvent and brush with rod do not clean it i would take it to a Gunsmith! for prognosess!! where is this problem in the barrel? a little more info would go a long way in getting the proper answers!

Swarovski 10-42 EL's couple years old and almost need tr**** and i do use one on occasion. This was a gift from Uncle Sam so thanks everyone!! Almost got a nice set of NVG's during Desert Storm but Flight crew came back for them cause they were around 2500.00 bucks back then and pilot was frantically looking for something and i asked him what he was looking for and i told him i stashed them in the Galley Storage for safe Keeping!! hehe!!

http://www.usgalco.com/HolsterG2.asp, your budget is going to limit you big time but their are other cheaper manufacturers! and i am sure they have some cheaper ones but their are a few at Galco but depends on which type you wanted? https://php2.secure-shopping.com/handgunholsters/gun_pants.php since ya did not specify a type maybe ya would like this one seems cheap enough but maybe not what you want? can't be too pickey for your budget! http://www.lonestarholsters.com/product/RSR7506 ?

The DC Forum members seems to really like the Brown Sugar Call and Kicks Tubes? http://www.duckcommander.com/commandPost/forums/

http://www.cheaperthandirt.com/44142-10956-1146.html would think these would be the type that would work ok! If your magazine cap has a similar hole like the back one this one should work and they are on a lotta slings! Idividual swivels which are cheaper can be had at Uncle Mikes for around 12.00 they are Quick Disconnect like the ones in the link . I have not seen a Benelli that did not have the same small holes in the butt and other on mag cap.

Probably need a smith to custom fit your shotgun? Benelli does not offer much as far a custom fitting shotguns!