Super M4

I have one of SOCOMGUY's tubes on mine and the Brownells part number is #301-000-491. It works just fine in there!

Well as it turned out i was misinformed on the M4. I saw it yesterday and it was an M1014 and $1300 for it used, it wasnt in the best condition.

I found a used M4 11707 at a shop for $1200 with the Coll buttstock. It's in great shape, I am considering going back tomorrow and getting it if it's still there, I'll try and offer them less. With the crazed going rate on the Coll stock I figured I'd sell it on EBAY and then end up with a used M4 for like $600.

Sure Cycle mag tube ext. are good stuff, mine worked fine on my M4 and comes with the follower and new mag spring. The only downfall it wasn't the nicest looking ext. It's black with a big black locking ring that screws onto the tube. But for what you seem to be putting it on it should work well for you.

You have to take the barrel off the gun, and gently pull the rubber gas piston cover back and hook it in on one side, it will pop right into place, then slide it toward the muzzle end to lock into place.

I added one of SOCOMGUY's full length tubes and had the same exact problem. I ordered a few extra factory M4 mag tube springs from http://www.brownells.com they were like $6 each. That solved my problem and it feeds like it did before.

thanks, I like it. shoots great. I wanna get another one, but the 14" Entry, Im just debating on spending $2400 for one.

www.brownells.com shows them in stock. They sell a lot of the Factory Benelli M4 parts on there, unfortunately no full length mag tubes, barrels or the skeletonized stocks. Other than those 3 items they have just about everything else.

Just buy the new Surefire M80 rail and mount whatever you wish on there. It works great, here is a pic of my setup.

I didnt purchase one of these, but did try one out and liked it. The M4 cost so much as it is now, and the ghost rings are just as fast as the Aimpoint without having to spend another $600. I already have almost $2,000 in the gun now, so I decided not to pay so much for the Micro T-1. Here is a pic though if you'd like to see it.

I prefer the Specter MOUT sling setup over the Blueforce Anaconda, but I am still in the process of getting something else. I do not have any pics of the Anaconda sling on the gun, but can take some pics of it if you would like to see it on the gun. I sell them at my shop, so Im always trying new things on it all the time, might take me a few days to get some pics uploaded on here. Here is a pic of my M4 with the Specter MOUT sling.

Check out the www.spectergear.com MOUT sling or the www.blueforcegear.com Anaconda breacher sling it is based on a bungy system. You will also need a www.blueforecgear.com SOC-C universal sling adapter- long.

SureFire 6P, click on/off tailcap, shock isolated bezel, blue filter in Vltor CK mount.

I got my Surefire Rail in the other day. It looks great and functions great as well. Here are some pics.

Benelli M4 shooting 2 3/4 " shells. I have tried bird to buck shot and still the last round is getting stuck in the tube. It begins to feed out and gets stuck 1/2 way out the tube and 1/2 on the shell carrier. It's a factory mag tube spring but the full length tube. I've tried it with the factory follower and a Brownells follower, still the same problem. The gun is only about 4 months old. Maybe i need a new mag tube spring? Are all 12 ga tube springs the same diameter and just in different lengths? Can I buy another factory M4 spring direct from Benelli?

That's kinda what I had heard from some other people is they are about $5.00 a shot. Some friends of mine did some testing on them recently and as soon as I get the pics, i'll be sure to post them on here. I guess I'll just hold onto the 5 i have, 2 of them are on the side saddle of my M4!

Has anyone tried these or let alone heard of them? This guy came in my shop the other day and he had about 5 boxes of these, all 3" magnum loads. He told me they are very intense and cause massive wound damage. They were designed by a French guy and are basically impossible to get into the states. The guy I got the one box from said his family used to Import them, as well as alot of other guns several years ago. It's a lead slug that has a steel rod center core that is fin stabalized. They are designed to shoot from smooth bore, rifled or choked barrel. I'd like to try some of these out on some steel barriers and see how they penetrate but not if I can't find more of these. Here is the website link http://www.sauvestre.com:) Let me know what you guys think?

The best thing I have found to run flawlessly out of my M4 is Federal lead Game-Shok. 2 3/4, 1 1/4 oz shot #4 its a heavy field load, with 3 1/4 dram 1220 fps. but works great for shooting steel plates in 3 gun matches with the 18.5" bbl.

Deadbird, thats exactly where i purchased mine from was at Brownells. It works great, so much easier than before.

Daves Metal Works makes one for the Benelli Super 90, not sure if it will work on the Nova or not, but I have one on my M4 and it works great.

Someone needs to get them to make a dedicated weapon light, like the one for the Benelli M1 instead of a rail.

Has anyone tried the M4 ext. from www.nodakspud.com they are parkerized steel and look just like the factory Benelli tube ext. Just wondering if anyone has one if you could post some pics, i'd like to get one and sell my SRM extension.

I'm running a Sure cycle mag tube extension on mine with the provided red follower and longer spring. I had complications on feeding with the longer spring and could just barely fit the 7th round in the tube. I switched back to the factory spring and kept the new follower in and it runs and feeds flawlessly.