Hookster
-
Posts
1838 -
Joined
-
Last visited
Posts posted by Hookster
-
-
Looks good Jackalope!!!! We like pics around here...All you need now is a full length mag tube!...
-
This should be interesting...
-
I use a Specter Gear sling
http://www.spectergear.com/ProductDetails.asp?ProductCode=292
it comes with an attachment adapter to adapt a 1 1/4" sling to the Benelli buttstock attachment point but I use their Buttstock shell holder as my rear attachment point
http://www.spectergear.com/ProductDetails.asp?ProductCode=084
Later,
Hookster
-
The new season starts Oct 14th for all the Walking Dead fans... It should be a good season!!
Later,
Hookster
-
-
ordered from brownells!
Me too!!!!......
-
Welcome to the forum Da Krack3n !!!! I'll post review and pics as soon as I have one in hand
Later,
Hookster (also from the great State of California)
-
Here is the TDS for Loctite 243
http://tds.loctite.com/tds5/docs/243 NEW-EN.PDF
Compare it to the TDS for Loctite 242, and pay special attention to the bond strengths on Stainless and other more inert metals.
Thanks UNO!!...
-
For semi-permanent install:
Loctite 243 or Loctite 242 AND PRIMER, or Rocksett (unsure of how permanent this is in this application, heat WILL NOT WORK to remove it. Rocksett claims is water-soluble. ) or Vibratite VC-3 (very impermanent, but should hold it solid per claims, ships with Gearscout mounts and is used on M1Abrams turret bolts).
Loctite 242 by itself isn't going to work.
Hey UNO does the Loctite 243 release with heat?
-
True, but I think more along the lines of people irritated that the combat shotgun they all really wanted, finally in its true configuration, was limited in quantity and too expensive for most. My guess is quite a few sour grapes were spilled by miffed M4 enthusiasts to the ATF about how this gun could be legal
That could well be true...
-
I was at local gunshop this morning while they were on the phone with thier Benelli rep. They asked about the M4 H2O they had on order and were told the ATF ordered Benelli to stop shipping/selling the M4 H2O. I'm guessing there were some compliance issues and not enough US made parts. I was lucky and got one of only two there were delivered and sold in their reps territory. Rep told them he had no idea when they would be out again.
Your tax dollar at work!!!....
-
Hey John! No worries! Your M4 sounds fine...You just need to get used to how it operates....the cartrige drop lever allows you to change to say a rifled slug by port-loading it instead of it feeding the next round in the mag tube. (by not pulling trigger on the chambered round and not pressing the cartridge drop lever you can eject the round in the chamber without the next one in the mag tube feeding)
The rounds don't leave the mag tube and go onto the shell lifter unless the trigger is pulled. (or cartridge drop lever depressed)
Bolt should lock back when empty if the last round was fired. if it was ejected without being fired (like when changing out a round) it doesn't lock back
The shell lifter is only not allowing a round to be fed into the mag tube if you have dropped the hammer say on a dummy round and the bolt has not cycled. As soon as you rack it again (simulating a fired round you'll see that it will allow you to top off the tube.
A lot of people new to Benelli have this issue so no worries. Play a little more with dummy rounds and remember to pull trigger if you are trying to simulate a round firing and it will all become more clear.
Take Care
Hookster
-
Check put this problem forum member Mean Green had with hand guard fitment. On page 5 of my KZ review he discovers cause of the issue (barrel not fully seating see page 4 of thread)that was described earlier in the thread I believe this could have lead to loosening if the weapon had been fired in this condition
-
Someone buy this thing!!!!! :-)
-
Yeah I saw that too... Did they confirm you order?
-
Sounds good TimerOO!!!! I like the OD green!! Welcome to the forum
-
yup been in Roseville for 6-7 yrs came from San Jose
family all live in NV. so I dont suffer from the cali gun laws I just go there where I have but dont have full auto,lol
my mom has full auto M11A1,lol
Very cool Rocket!!... I never did live in Roseville city limits but lived all around there over the years in Citrus Heights, Auburn, Carmichael, East Sac and South Natomas. Roseville sure has grown over the years... When I was going to High School in the late 70s there wasn't a whole lot there except Denio's Flea Market and a few cowboys..
Later,
Hookster
BTW.....Your Mom sounds awesome!!!!!
-
Are you a Sacramento guy Rocket? That was my old stomping ground for about 20 years
Later
Hookster
-
Hi all
Im seriously concidering ordering a
http://www.shop.carriercomp.com/product.sc?productId=3&categoryId=4
But ive heard there are back order issues. Any clue if my CC will be charged 3 - ? weeks or what ever before i get a presant on my door step ?.
Just do it!!! If you regret it after it arrives you will be the only one that I've ever heard of in the "I regret ordering it" column.
Later,
Hookster
-
Looks good Eversor!! Are you happy with the ergonomics on your light placement?
-
a quick reply on a Fri. afternoon -
Thanks Sukhoi!!!..Sounds good...my credit card is warmed up and at the ready...
-
I just made an email inquiry - no fone # on contact page.
Sounds good Sukhoi! Let us know what you hear...
-
Bumping this because it's been about 2 weeks and I'm looking for an update.
Any word? I checked the CDM website but nothing. I'd imagine that would be the last thing he updated anyway.
No.... I've got a reminder on the computer that the 2 weeks is up so I've been checking every time I get on....nothing yet... but I'll post as soon as anything changes.
Later,
Hookster
-
well super33 looks like I will be seeing the WI weather sooner than though. My training partner just took a fight for Rouge fights against one of the guys on the ultimate fighter season when Rampage and Rashad were coaches!
still trying to get them to pay for all our flights. I think its a small promotion cuz usaually they pay for me and other corner no problem and also include his wife. this time being weird.
You know fighting "MMA" is that Rouge promotion small?
Hey Super 33... When Rocket arrives be sure he gets issued a cheese-head...
Geissele Benelli M4 Super 90 Hammers Available
in Benelli
Posted · Edited by Hookster
Kip isn't manufacturing...just distributing...I got my shipping notice too! Just a few hours after I placed the order..