PCFIVEZ

it looks like the front sight is blocked out by the mount of the scope.

would cutting 4.5" off an 18.5" barrel be the same as the 14" barrel on the SNT?

ok, problem solved. Mitch and Frances from Mesa Tactical is going to replace the one I have for one that fits properly. THUMBS UP FOR MESA TACTICAL!

did you send the whole shotgun to benelli or did you just send in the firing pin?

$900 for a barrel? whoa!

this is getting real confusing! i just looked up a picture from amazon.com and judging by the pictures somebody else has the same issue as i do w/ the 16 teeth! but along side of it, they are showing a picture with 15 teeth as one for sale. http://www.amazon.com/gp/customer-media/product-gallery/B0050JKRSG/ref=cm_ciu_pdp_images_2?ie=UTF8&index=2&isremote=0

OK, i contacted cust support and this is how it went...does Mitch's reply make any sense to anybody here? see the email and reply below.... EMAIL: On Mon, Dec 24, 2012 at 12:30 AM, PCFIVEZ wrote: > for my Benelli Supernova Tactical...I installed it and it seems a bit > off...the picatinny rail section is a little longer than the receiver area > (surface it sits on). The screws all line up and fit easily. Is it supposed > to be this way or did I get a factory defect? REPLY: It's supposed to be like that. For the last year or so these items were machined with a certain number of recoil grooves that caused that slight overhang you noticed. It's not a defect. Regards, Mitch Barrie -- Mesa Tactical Gear and accessories for law enforcement, military and personal defense. Costa Mesa, CA o 949-642-3337 o www.mesatactical.com

anybody here have any experience w/ Mesa Customer service?

Anybody know where I can buy the 14" barrel for my Supernova Tactical? Is it even available to civilians or is it strictly meant for Law men?

I recently installed a Burris Speedbead + Fastfire II Optic on my Benelli Supernova Tactical. After installation, I noticed that it doesn't sit perfectly flush on the pistol grip. I can feel a very small gap on the left side as the right side sits fine. Is this a problem that should be addressed or am I just being super anal? I also removed the small boomerang shaped foam sticker from the rear area to fit it on easier...does that foam serve a purpose such as shock absorbancy or alignment? I co-witness the Burris along with my ghost ring sights and after a few adjustments everything lines up. [ATTACH=CONFIG]1844[/ATTACH]

I had just recently acquired a 6 shot sureshell carrier from Mesa Tactical...I installed it and it seems a bit off...the picatinny rail section is a little longer than the receiver area (surface it sits on). Is it supposed to be this way or did I get a factory defect? Please see pics... [ATTACH=CONFIG]1839[/ATTACH][ATTACH=CONFIG]1840[/ATTACH][ATTACH=CONFIG]1841[/ATTACH][ATTACH=CONFIG]1842[/ATTACH][ATTACH=CONFIG]1843[/ATTACH]

i am waiting to get the nordic setup. is your TLR2S the one w/ the green laser as well? also, where did you get that sling setup? i was looking for a clip like that but don't know what it's technically called.

Thanks! I'll look into it.

yea...but i have a smooth bore barrel. how would i ever screw that thing in?

Please count me in. I would love a hat!

this video (borrowed from YOUTUBE) should answer your second question. as for mounting it...i'll have to figure that one out. scope mount on nordic clamp w/ pic/weav rail maybe?

so wait, is it true that the gun will always hit what the red dot is on? i find this hard to believe. i just installed mine but have yet to test it. i am co-witnessing it with my ghost ring sights on my SNT. i move my head and it just seems the dot moves around too? also, i still cannot see how i can aim and shoot with both eyes open with this thing...what am i missing here? i have a speedbead mount with a FAST FIRE II dot.

i'm 12...gauge! HA~!

i can stand the smell of these guys...but still a bit hesitant to get sprayed...wasn't me.

OK i made my choice. i picked up the Streamlite ProTac HL 88040 w/ strobe and 600 Lumens. I was sold on the 600 Lumens + Strobe along with the $60 price tag. any opinions?

[ATTACH=CONFIG]1790[/ATTACH] i was walking down the street and i saw something neat...

one last question, does the rubber limb saver part of the collapsible stock come off like the one on the pistol grip stock? i would like to attach the limbsaver rubber of the pistol grip onto the c-stock...has anybody done this?

OK, i got a small 2" Husky clamp from Home Depot along with a rubber mallet. While using the clamp to depress that PITA button, i smacked the stock portion real good twice and it finally slid in. TOOLS USED and OUTCOME below... THANKS FOR YOUR HELP AND INPUT GUYS!

congratulations on a great shotgun! by any chance, would you be interested in a brand new stock pistol grip? i now have one up for sale now that i converted to collapsible stock. [ATTACH=CONFIG]1775[/ATTACH]

OK, i will try with a mallet and a small clamp to press the button in. my thumb is all bruised up from all the hard pressing last night. THANKS GUYS! i will post some pics when i finally get this sucker in.