bychance12

I’ve read there’s only around 60 of the model 11711 that made it out to the public.

The damage can be clearly seen on the finish of these M4’s in the pics and video. The 3/4 FFT H20 handle I purchased will not be used on my H20.

Interesting, I’ve had mine for about 2 months, maybe there was a change in dimensions from the vendor making them? After reading the rules for returns on FFT website, it doesn’t appear I can return for a refund, I did install the handle, then noticed the tight clearance on mine, was very concerned to be honest. And then I was wondering why I never seen any negative feed back, or damage to finish, well until now... Thanks for checking.

Rubicon, do you have the original handle? If you do, do you mind putting them like my photo and checking the clearance please.

If you take the original charging handle, and turn it around and put the FFT next to it, it doesn’t appear to be the same length to the inside of the handle. I would need to use calipers to get an exact measurement.

I had the same clearance issues, put a piece of paper between the receiver and charging handle, if I put tension on handle, could not remove paper. I have an original HTO, not taking a chance on scratching the NP3 coating off.

I’m waiting on this to come out.

Appears there’s one posted on Gun Broker, good luck!

I got lucky in January, found this Original H20 posted on Arms list before everything went nuts.

Did you post a picture of your design? Never mind, I found your pictures and video, sweet! New too the Benelli M4, I just picked up a used one last month. Im not a big fan of the stock charging handle so far. I ordered a 3/4” from FFT, I was torn between the 1/2” and 3/4”, hopefully is stays in the bolt!

Did you post a picture of your design?