EzGoingKev

I have been using Geissele's Go Juice. I like that it is non-toxic. I have run it in single degree weather without any issues. Not super cold, but it is what it is.

My M4 had a really stiff trigger. I swapped out the factory trigger return spring with this one from TTI. IDK if it will give you what you are looking for but it made an improvement on my M4.

I could not get the seventh round in magazine. I tried swapping out the follower to one that was shorter. I swapped the springs out. I tried clipping some coils. None of that worked. I installed RX's cap and that fixed it. What are the details on the Gen2 caps?

I know some of these posts are old but I see where someone stated they swapped out the light bodies. I went the opposite way and have a spare Surefire bolt on/clamp on body: If someone has a current Scout setup with the pivot mount and wants to trade please let me know.

Unrelated but IDK if it is the angle but it does not look like the retaining ring is on correctly.

OK thanks. I removed my rail and mounted an RMR using a Scalarworks mount.

It came with a rail from the factory. What are these doing for you that the OE rail was not? I am not trying to be a smartass I am asking in case I am missing something.

Swap the tube out for the RX 6 position tube. Figure out where you want the stock and "lock it in" there.

I was looking on MGW and saw there were two options listed for the disconnector pin: According to the description they both fit the M4. Looking at the pics 60304 has tapered ends. 70007 does not. Is 70007 an improved version of 60304?

Yes it did.

https://youtu.be/JNZuG1m1cUY?feature=shared

This barrel came off an M4 I bought brand new in 2021. I sent it out to Rob Roberts Custom Gunworks to have the forcing cone backbored. It has never been fired. $500 shipped. I do not do PayPal/Zelle or any of the other online pay methods.

Geissele has not made them in years. I have used these - https://shootingsight.com/?product=benelli-hammer

Does the magazine cap for the rail give the additional .150" of space like your OE replacement cap does?

I believe the washer is only for the polymer trigger housings.