Devil Dawg

I’ve had the same problem with the one from FFT. I communicated with them and they gave their song and dance. I’ve been around shotguns for a very long time and have never seen such a tight fit and lack of spacing. I just opted to eat it and purchase two for taran. Needless to say my business has navigated towards other vender’s. The said fact about FFT is that they won’t cowboy up to their poor design.

I paid $1,400 for the LE but in black. That’s way to much. Thanks

Colt AR LE 6920 BENELLI M4 Sig Legion 229 (9)mm

To my knowledge no US Military has tested or opted for the Beretta 1301. Still, certain units in the Marine Corps used the 1014 . The 590 and 870 are still widely used even in the Marine Corps. But just like the 1911 the 1014 is a hoss, but the 1301 is no slouch, even though my round count on the 1301 is limited to roughly 3 months ( with no failures regardless of what I feed it) and My 1014 days started in 1999 I wouldn’t mine either weapons for an offensive or defensive situation. I’m blessed to own both.

I have two m4’s and one 1301 LE. I love my Benellis, but the 1301 does better with lower loads; not even one hiccup after firing about 500 rds this week. It’s a great weapon that hopefully will soon be combat proven by the US Military.

Greetings Just a few lines to give my props to Mesa Tactical. A few weeks ago I purchase an Urbino pistol grip stock with limbsaver. While at the range on Friday 2/4/22 the limbsaver for some reason cracked. I called on that same day (Friday) and the kid in customer service was outstanding, needless to say today 2/7/22 I got a new limbsaver for the Benelli M4. I will continue to use them, with pleasure. Bravo!

I guess my feeding problem is the mag tube spring. When I switched mag tubes from 5 to 7 I got a new spring from BP.net and it was much shorter than the OEM spring. I will go back to the OEM next time out.

Thanks for the reply, maybe it as a bad batch. But as stated the 1014 and 1301 eat it up. The H2O Would only chamber a round when I hit the the shell port lever.

Greetings Took the H2O on its first range day with the 508T. Out the box at 25 meters hitting center mass. The optic is mounted on a scalarworks. Ammo used was Remmington slugger; weapon would not cycle correctly. Switched to Winchester and all was good. Has anyone had problems with the slugger ammo? My 1301 and 1014 eat it up. SF

It all depends, at the end of the day they both carry 7; that’s my mine concern. I consider the 1014/M4 tools. Functionality is all that matters. I also have a 1014 , got the tube from benelli parts. I consider the one from socomguy better quality, besides I’m sure that he will stand behind his work. Once again for me it’s all about functionality. S/F

Titanium

Greetings Just to share my experience with purchasing a 7 round cerakoted H2O tube from (SOCOMguy) 1. Super smooth transaction 2. Fast Shipping 3. Awesome quality 4. Great communication. With that said the quality of this tube is superb . Taking it to the range tomorrow.

For those of you that like the Mesa tactical shell carrier. Mesa Tactical will be coming out with the same design but with the ability to install a RMR. I guess it should be hitting the shelves Within the next couple weeks.

Greetings, I have a few RMR's on some of my hand guns, but have the Holosun HE510C-GR, my old eyes like the choice of reticles 1/3 cowitness.

Ladies and Gents Planning on installing the 3 position recoil tube on the M4. Operation looks straight forward. My question is the following: Is it necessary to remove the trigger housing mechanism to perform this task?

Ladies and Gents Planning on installing the 3 position recoil tube on the M4. Operation looks straight forward. My question is the following: Is it necessary to remove the trigger housing mechanism to perform this task?

That’s a Great looking blaster.

I’m running a Holosun 510 on mine with a 1/3 cowitness , works great for these old eyes.

I want to collapsible stock more or less for transport/storage , since I no longer wear body armor I prefer to fire it fully extended.

Got it in today USPS 1/8/22 Going to install tomorrow.

I guess I’m not really that lucky ?

Thanks for welcoming me on board.

Greetings I also have a 1301 and find it to heat up faster than the M4, with just shooting regular remington 2.75 slugs .?

Greetings just stumbled across the forum and decide to join. Looks like good streams of information to help me enhance my M4. I fell in love with the M4 back in 1999 when I was in the Corps and they let’s us fire them for about 3 days as part of the integration of the weapon to the FMF. LOVE at first sight. Hopefully I can continue to expand my knowledge of the weapon system on this forum. In addition I have a 1301 LE and a Super Nova tactical. Keep the good info coming. S/F

Greetings I ordered mine on 1/2/22 and got a shipping notification today 1/3/22. Guess I got lucky