willfish Posted September 6, 2010 Share Posted September 6, 2010 Had my SBE stripped to do a thorough cleaning and install a Sure-Cycle. Upon reassembly, I can't lock the bolt open. When I depress the cartridge drop lever (bottom of receiver, near the trigger guard), I hear the usual "click", but when I pull the bolt back, it won't lock open. I removed the trigger assembly (and other components) following the instructions in the Owner's Manual. I re-assembled per the Owner's Manual, including holding the carrier button "in" while re-installing the trigger assembly. I've taken it apart several times now thinking there was something "off" with the alignment between the cartridge drop lever and the carrier latch, but there's nothing obvious and the result is still the same upon reassembly. Aside from cleaning, I made no adjustments nor removal of individual trigger assembly parts. Any thoughts? Thanks, Will Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.