Rmr for my Benelli M4

[Donrozon]

Hey folks 

Im shopping for my Trijicon Rmr for my Benelli M4 witch one do you recommend? 

Dot or triangle? 

Gen 1 or 2 ? 

Moa how manny 

cheers 

Don 

[StrangerDanger]

Gen 2 is designed to handle recoil better, so I’d go with it. I like the 1moa dot size. So the RM09. I don’t find the small size hard to find when you’re using a firearm with a cheekweld. Smaller the dot will cover less of the target giving you better accuracy. 

[Sukhoi_fan]

Gen 2 since Gen 1 have flicker problems and you have to buy an aftermarket sealing plate to remedy that.

My personal preference would be a 6.5 MOA dot on a shotgun, a larger dot makes for faster acquisition on a shotgun. 6.5 MOA = 3.25" at 50 yards.

And I actually prefer a Aimpoint Micro in 4 MOA since the RMR distorts the moment a droplet of water gets on it and is therefore not an all weather device, imo.

Edited August 23, 2019 by Sukhoi_fan

[Donrozon]

Thanks guys 

I decided to got with the Rm07 type 2 with the 6.5 moa 

ordered in today 

cry once they said...

With the Scalarworks sync 

all the puzzles are getting in place slowly 

 

 

 

[BenelliFanboy]

I saw this too late I would have recommended a Holosun HS507C or HE508T-RD (Titanium mode).  It gives you 3 reticle options.  2 MOA dot, 32 MOA circle, or 32 MOA circle with dot.

I have one on my M4 and use the 32 MOA circle and it works great.  Cost less and compatible with RMR mount too.  

[Donrozon]

6 hours ago, BenelliFanboy said:

I saw this too late I would have recommended a Holosun HS507C or HE508T-RD (Titanium mode).  It gives you 3 reticle options.  2 MOA dot, 32 MOA circle, or 32 MOA circle with dot.

I have one on my M4 and use the 32 MOA circle and it works great.  Cost less and compatible with RMR mount too.  

Thanks for the advice but I found really sexy those trijicon Rmr 

[Donrozon]

Mail calllll