Jump to content

M4 - Incorrect Collapsable Stock Tube?


Recommended Posts

Thank you for the response. ...Its a 2020 Benelli special edition M1014.  It does not have a collapsible stock or other detents on the tube to adjust length. 

It will lock in the vertical position, but also twist to the left and locks at a 45 degree angle?? Just not sure why it would lock in the 45 position also. ??

Link to comment
Share on other sites

  • 11 months later...
On 9/17/2021 at 8:10 AM, 0Z. said:

New to the Benelli family as I just picked up a LE 11715 M4, the stock that came with it only has two positions (short and extended). Is this same as the 3 position tube that Benelli sells (SKU 70043)?


all the way in (for storage), middle and fully out.

Link to comment
Share on other sites

On 9/4/2020 at 6:05 PM, StrangerDanger said:

Hmmm. Well you do have a three position stock. What I would check for is to see if the stock has been pinned pin place. Usually pinned stocks have a screw beneath the cheek. 

When you press the adjustment button, does it push in almost flush with the frame of the stock? Once pressed, are you rotating the stock 45 degrees, then pushing the stock up and down the extension, then rotating it 45 degrees back to center?

I had lost track of this thread and didn't realize you had responded SD until it was bumped recently. I'll try to check that out soon. Thanks.

  • Upvote 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...