Torque drive

[jsr1014]

What's a good one that's decently priced? 

[benelliwerkes]

What torque range?
 

[jsr1014]

3 hours ago, benelliwerkes said:

What torque range?
 

Up to about 40 inch pounds

[benelliwerkes]

The Weaver or Wheeler Fat Wrench would work well.

[Ihrinwe]

I use this and never had any issues. It goes on sale from time to time. 
 

VANPO Digital Torque Screwdriver 2.66-53.1 in-lbs/0.3-6 Nm, Adjustable Screwdriver Torque Wrench Set with Buzzer/LED Indicator Notification for Bike Repairing, Tools, Maintenance and Mounting

https://www.amazon.com/Screwdriver-2-66-53-1-Adjustable-Notification-Maintenance/dp/B09YTS1Y6C/ref=sr_1_4?crid=37D7WT3L5FY1O&keywords=digital+torque+screwdriver&qid=1688440624&sprefix=Digital+torque+%2Caps%2C161&sr=8-4

[RxArms]

10 minutes ago, Ihrinwe said:

I use this and never had any issues. It goes on sale from time to time. 
 

VANPO Digital Torque Screwdriver 2.66-53.1 in-lbs/0.3-6 Nm, Adjustable Screwdriver Torque Wrench Set with Buzzer/LED Indicator Notification for Bike Repairing, Tools, Maintenance and Mounting

https://www.amazon.com/Screwdriver-2-66-53-1-Adjustable-Notification-Maintenance/dp/B09YTS1Y6C/ref=sr_1_4?crid=37D7WT3L5FY1O&keywords=digital+torque+screwdriver&qid=1688440624&sprefix=Digital+torque+%2Caps%2C161&sr=8-4

I also use that same one but a different brand in Canada.  (I’m sure from the same factory in China).

it is a good quality torque screw driver with fine tuning of the torque values.  It also has a low +-2% range which is lower than the majority of torque screw drivers in this price range.

[jsr1014]

On 7/3/2023 at 10:28 AM, benelliwerkes said:

The Weaver or Wheeler Fat Wrench would work well.

I just purchased the Wheeler Fat Wrench, so far its been great. Thanks

[jsr1014]

22 hours ago, RxArms said:

I also use that same one but a different brand in Canada.  (I’m sure from the same factory in China).

it is a good quality torque screw driver with fine tuning of the torque values.  It also has a low +-2% range which is lower than the majority of torque screw drivers in this price range.

It was a toss-up between the Wheeler and this one. Chose the Wheeler just because of the analog simplicity of it. 

Thanks

[Milspec]

Whia

[jsr1014]

4 hours ago, Milspec said:

Whia

Wiha? If that's what u mean yes, I looked at those too, I have a lot of Wiha tools, and they make great stuff. The torque wrench's they make are no doubt great, but they were just a little too pricey for me.