sonyman74 Posted October 27, 2007 Posted October 27, 2007 Was looking around for a replacement and only found this one. Was wondering how it was and some pics maybe to see how it looks. Quote
M1014 Posted October 27, 2007 Posted October 27, 2007 on the M4 I vote don't,,,,,,use the factory stuff. Quote
DOOKEY FACE Posted October 27, 2007 Posted October 27, 2007 I have it installed. As a matter of fact, I never put the original one on, and I installed the GG&G when I took my M4 fresh out the box. Quote
MrMilitaryPolice Posted October 27, 2007 Posted October 27, 2007 I also have it on my M4 as well, and ive heard all the horror stories about them flying out and coming loose but after 350 rnds, its still working flawless and really adds a nice touch to working the bolt. I say go for it based on my experience Quote
M1014 Posted October 27, 2007 Posted October 27, 2007 since the factory provides a well thought oversize bolt,,I concentrated on the carrierbolt release button,,its not accessible enough for me,so with Practical model as my guide this is the finish product,,,,,,,,. Quote
Pa Lawman Posted October 27, 2007 Posted October 27, 2007 Who manufacturers the bolt release you have installed? I really like the sizing of it...... Nice Choice! Quote
M1014 Posted October 28, 2007 Posted October 28, 2007 its an oversize 45 acp mag release button ,its drilled ,, tapped and locktite into the factory button,,,,gotta dig up the manufacture name. Quote
Pa Lawman Posted October 29, 2007 Posted October 29, 2007 Ohhhh, I thought it was an aftermarket made for the M4. Did you do the work yourself or did you "sub it out" to a smith? Quote
Flame Red Posted October 30, 2007 Posted October 30, 2007 its an oversize 45 acp mag release button ,its drilled ,, tapped and locktite into the factory button,,,,gotta dig up the manufacture name. I'm looking for one too. Please let us know! Quote
M1014 Posted October 31, 2007 Posted October 31, 2007 the co. name is johnmasen.com out of cal,,,I assisted my gunsmith on the isallation of mine. Quote
Flame Red Posted October 31, 2007 Posted October 31, 2007 the co. name is johnmasen.com out of cal,,,I assisted my gunsmith on the isallation of mine. I am not sure I found it. Did you buy the one for the 1911 and adapt it? This what you used? http://www.johnmasen.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=J&Product_Code=4542 Quote
M1014 Posted October 31, 2007 Posted October 31, 2007 yes,,its a two piece unit that you simply screw the button off the base. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.