Vang Comp style modifications

[double down]

I've seen a few postings about the Vang Comp System and wanted to add some information. Keep in mind this type of modification is not recommended by Benelli and probably voids your factory warranty.

 

The Vang Comp System designed by Hans J. Vang, is a set of modifications to your shotgun barrel consisting of lengthening the forcing cone, back-boring the barrel, and adding compensating ports. Mr. Vang has paired with DVC Armaments / GG&G to produce barrels that allow these modifications to be completed on the Benelli M1 Super 90 based shotguns. While I haven't been able to acquire much information about the process it appears to work like this. You are required to send in your barrel and it's cut apart to build the new barrel. The reason for the new barrel is stock Benelli barrels are too thin and overbored.

 

Well I'm here to make Benelli lovers aware this can and has been done quite extensively by several shotgun specialist without building a custom barrel. Three very reputable names in the shotgun industry do these same modifications to your original barrel. Ballistic Specialties, Briley Manufacturing, and Seminole Gunworks all have experience performing these modifications to the Benelli.

 

Depending on which company does the work your barrel can be modified to the following specifications.

 

Forcing cones lengthened to 3" or 5"

Backbore to .733" or .735" diameter

Choked to spec or interchange style choke tubes

Porting

 

Other accuracy modifications can be done such as trigger jobs and component polishing.

[M1014]

thankyou

[adamlau]

Anyone get the full Vang Comp barrel treatment for their M4?

[Duggan]

Other accuracy modifications can be done such as trigger jobs and component polishing.

 

What do you offer in the way of trigger jobs for the m4?

 

I don't expect my m4 trigger to break like the geiselle in my rifle, but I've found the m4 trigger to be beyond terrible.

 

It wobbles back and forth, has a huge creep, and in general is just a letdown when you consider how great the rest of the gun is.

 

Obviously, a trigger job for a combat shotgun still needs to be rugged enough to withstand some pretty heavy hits ...

[adamlau]

Anyone get the full Vang Comp barrel treatment for their M4?

 

Date: May 8, 2008

From: [email protected]

 

"We no longer work on Benellis as we have to replace the barrels in order to do

our VCS. When we do that the cost is around $1000." - Ron @ VCS

[Dntama]

The Nova and Supernova I have really would not benefit much from the VCS system. I have found using good ammo like Federal Flite control buckshot gave me similar patterns to an 870 and Mossberg modified VCS barrel. I also like the chrome lining of the Benelli barrels and you would lose this by back boring your barrel.

[Unobtanium]

[mkporwit]

When I got my VangComp 870 last December, Cody mentioned that they were about to announce the ability to work on Benelli and Beretta... I'm hoping this is it. I'd love to have my M1014 modded and threaded for chokes by them.