lonewolf962 Posted December 6, 2006 Posted December 6, 2006 I have a quick question, how do you take the spring out of the stock? I know how to take the stock off. I have looked at it a few time but did not try anything for fear of breaking anything. Quote
mudhen Posted December 7, 2006 Posted December 7, 2006 Originally posted by lonewolf962: I have a quick question, how do you take the spring out of the stock? I know how to take the stock off. I have looked at it a few time but did not try anything for fear of breaking anything. For what gun? mudhen - CA Quote
lonewolf962 Posted December 7, 2006 Author Posted December 7, 2006 sorry guys its the sbe 2and its not the forearm or magazine spring im not sure if you can take this spring apart or not but im sure you can, its the spring that the bolt assembly slides into the stock [ 12-06-2006, 08:58 PM: Message edited by: lonewolf962 ] Quote
mudhen Posted December 7, 2006 Posted December 7, 2006 You can remove the nut with a 17mm wrench. Some use heat first, some don't. I take mine apart all the time. I don't use Locktite when reassembling, but some do... mudhen - CA Quote
ALSmoothBore Posted December 7, 2006 Posted December 7, 2006 I've working on getting to my recoil spring as well...so here's some followup questions. So we use a 17mm wrench to remove the stock retaining nut screw (code 050G) at the end of the recoil spring tube, and then the whole spring comes out the front of the tube? The parts manual indicates there is a retaining ring (code # 183L), but I don't see one on my SBE II? Does the actual tube come off when you take the nut off, or does it stay attached to the reciever? Thanks... Quote
ALSmoothBore Posted December 7, 2006 Posted December 7, 2006 A picture is worth a thousand words! Thanks so much... Quote
duckfan Posted December 7, 2006 Posted December 7, 2006 Tucker - Your pictures are worth it all! THANKS! Quote
lonewolf962 Posted December 7, 2006 Author Posted December 7, 2006 tucker thanks a million you guys are great Quote
tucker301 Posted December 7, 2006 Posted December 7, 2006 PM me for my PayPal account Glad to help, guys. Bookmark for when the next one asks. One note: The metal locking plate is not shown. I left it inside the stock. If yours pops out, simply put it back in per the manual's chart for proper cast. [ 12-07-2006, 01:58 PM: Message edited by: tucker301 ] Quote
Remy Posted December 7, 2006 Posted December 7, 2006 Hey Scott, Thanks so much for those photos-------they are very helpful. I added them to the "My Pictures" file on my computer. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.