Chairborne

Interesting that you used devcon. We use it to fill dents on aircraft leading edges. If it can stand up to 500+ knot airspeeds and pressure/temperature ranges we deal with it should work a treat on the low stress application seen here.

http://www.lesalesusa.com/products/benelli.htm I bought mine from there several months ago (don't ask how much with skel stock).

My M4 would have occasional problems as well when it was really new. I solved them by liberal application of lube and good old break in. After a few hundred rounds it runs great, will blast out all 8 rounds as fast as I pull the trigger, with cheap old wally world birdshot.

Switching out the stock requires no tools and takes about 5 minutes, tops. You just have to pull the bolt handle out, pop the trigger group out, and unscrew the stock by hand. Unless you have a great relationship with your local shop, why not save some bucks and get it online for less?

Did you try to remove the choke? How did it look? How did the threads at the muzzle look?

me Same here. There is some crap in the bbl after shooting a couple hundred round but a few passes with the BS and it's all like new again.

http://www.e-gunparts.com/DisplayAd.asp?chrProductSKU=980370&chrSuperSKU=&MC=

There are about 200,000 Marines with Eotechs on their (Benelli) M-4s. It seems to work well enough for them, and if you search you'll find plenty of pictures. That said I have a couple of EOs and wanted something smaller so I got a Burris fastfire (Dr. Optics clone) for mine. Sorry, don't have a pic with it mounted.

Actually a local gun shop here has them for $30 each! I picked up several, $10 hicap mags for my XD just can't be beat, and the little hard case is just a bonus.

That looks like a very nice (and a little less expensive) option, thanks!

Thanks for the suggestions guys. I found a B&T one with two rails that is $50, when the single is $75 from the same place, that's weird. I like Mesa's products but couldn't find any rails for Benellis, only the 870. Maybe it would fit, I'm not sure?

I'm going to mount a TLR-1 light on my M4, but I need a short piece of rail to mount it on. What's the best solution for a small/simple clamp on picatinny rail that would clamp onto the magazine tube? I'm not really a big fan of the Surefire forend and don't need all that rail real estate.

I'll definitely take a set, and a hammer too. It would be nice to have enough US parts to run a full length tube and coll stock and not violate 922®.

I'll take one when they are available.

Any updates with a link to order one, pictures, etc?

I use it all the time here in the big kitty litter box. It works very well on all sorts of things. It definitely keep my weapons cleaner than CLP did, it doesn't attract dust and dirt. I use it on my folding knives, and even on my hair clippers, it works great. The company is tops IMO for sending free samples to GIs too.