Rob72

Which is telling you nothing at all. Benelli guns seem to be highly variable in delivered spring weight. Some guns run anything, some balk with less than 2 3/4" 00 in the first 200 rounds. To answer the question: yes, the lighter spring will most likely help you. In addition, when you remove the plunger tube, go ahead and polish and chamfer the edges of the plunger itself, and polish the inside of the tube. This would not be a bad time to coat them with a teflon finish (Brownells +/- $26/can) or see about having it done by a local shop. Many automotive/engine shops are offering PTFE coatings.

44/40 cold blue is the best rub-on quickie.

I believe some 3 gunners have 60K + through their guns, so...FWIW. My only concerns would be wear in the receiver (steel on alloy) and possibly wear on threads in the tail. I had a quote for $50 to do Type III hardcoat anodize on my receiver. Cheap investment... Your barrel ring, just a stressed weld, bro', bad luck, but it happens.

http://www.triangleshootingsports.com/ http://c-rums.com/ http://www.accurate-iron.com/ Best of.

Ya know... if you Helicoilled the Benelli button, so that it was fully threaded, it would not be at all hard to mill a rib, instead of a neck, on the back of the bolt-on part, and a mating groove in the stock button. No rotation. Should not be more than $25-30 more...just a wild hair.

I like PGs, & here's "the Tip": you use the PG to pull the stock into your shoulder. Manymanymany people treat it like a big pistol with some funky appendage flailing against their chests. This beats you up. Try that hold if you must, but for comfort and speed: 1) Short LOP- 12" generally the max 2) Squared stance, with non-dom leg slightly forward. Lean into the gun.(Your instructor may have alternative advice- follow instructions, see how it feels.) 3) PULL that PG. Pretend that stock & PG are what you hold onto to be whisked to safety at 60 MPH.

Thank you, that answers a great deal. I'll be blunt: pumps are generally poor-shooter-stoopid-proof. This is the same reason that 90-odd percent of police departments carried revos until the early '90s. Revos have/had significant failures also, but they were familiar... I also agree- it is the shooter, not the tool. Just like auto shottys, auto-pistols do not tolerate poor technique or light loads well. I think we may have become lost in the auto-pump angle, but in reference to lighting, Awuerbuck, Givens, et al, are strongly in favor of appropriately used lighting. I'm not sure if Todd308 is the Todd I'm familiar with, but in either case, he summarized "current philosophy and usage":

I know, but sometimes you just have to kick that slinky over the next step.

Tom Givens and Louis Awerbuck, for startsies. But it sounds like you wouldn't be interested in much they might say. Se la vi. Vocalizing ignorance makes you look foolish...or trolling. Anyone on Enos' Forum running a pump in competition? Nope. Unless its pump-gun limited. But what would they know about GM class? I do apologize, you neglected my question- from whom are you receiving instruction?

Whom, exactly? While I will agree on the lack of need for the uber-Ninja railedreddottedsidesadledcollapsingstocksinglpointslingXRail zombie gun, your thoughts on lighting are around 15 years behind current shotgun philosophy and practice. Well maintained, "major maker" semis have no deficits in comparison to pumps, using defensive rounds, and at the entry level (i.e.,Moss 930) are arguably consistently more reliable than pumps (870 Express). I have lived in places (Houston,TX; Wichita, KS) where a bandoleer hanging by the shotty was not out of place, but, as noted, a sidesaddle provides a single reload in a compact, handy package. And, in that context, and along with your thoughts on weight, I like the 3 GunGear product. Of course, I'm also using the el-cheapo Stoeger M2000, which has a hard-point weight limit, unlike the auto-reg gas M4.

As I recall, stock finish was plain ol' matte blue with possibly a hint of gray. Personally, I would run it uner a wire-wheel, or a 320-400 grit buffer pad. Glass bead, or 600-800 AlOx, blast for a more matte look. I like Mark Lee's "stove top" bluing(Midway) for a deep solid blue/black. You could try adding a few drops of phosphate stripper (Home Depot) if you wanted to get a bit of gray. I personally have not done this, but there are several home-park recipes available on ar15.com.

Lord, no! That's the old M1 style, Williams (Sights), IIRC. Screws work loose, something like 4 different screws to set the base and sight assembly. Cutting edge around '88-'89. LPA is probably the most available & easiest to use. I like MMC, but understand they are having troubles delivering (again). You could get creative and M4gerize it- put a section of rail on the receiver and use a low mount BUIS and an XS banded front.

Same as any pump: Firing pin & spring Extractor & spring Ejector & spring Hammer & spring A whole new trigger group, if you run it hard.

IIRC, it is a 13" LOP. Cut down is not hard: http://www.benelliusa.com/forum/showthread.php?t=24972

My post # 66 http://www.benelliusa.com/forum/showthread.php?t=24972 I like the Vangs. It does require some detailing, but is well worth the effort. if your finger is inside the trigger guard, the safety is Off.