Jump to content

Benelli MR1


Recommended Posts

I really wanted to like them, but ergonomically they seem to be lacking compared to an AR/m4. Mag release, for example.


I have read about the mag release ,but that doesn't bother me. What I do like is being piston driven like the M4 it should run cooler and cleaner.

Link to comment
Share on other sites

  • 3 weeks later...
  • 6 months later...

Sorry gang, I had one and loved it, but I could never work through the FTF issues completely enough to think I could trust the lives of my wife and me if need be. I finally got the old GI 20 round magazines to feed pretty well, but every shot I was looking to see if the weapon went to battery. The build quality was excellent, operation was smooth when it fired (!) Be advised on the front end no one makes any accessories for it. The Benelli rails (optional) are plastic; however, the fore end is also plastic - and I defy you to try and break it. Finally, when I bought mine, the world looked like a short term proposition, as we know it. Still does. I decided if the MR broke, I probably didn't want to wait for the factory to send me a part. I wanted something I could resupply from "battlefield pickup." Huge in the military to pick up another weapon you already know, and keep going. You won't find parts for an MR1. I am not trying to discourage anyone, and this thread is old - so probably wont. I will say it was the best feeling rifle to hold and shoot I ever had - however, the caveat: no possible cheek weld. The shotgun angle of the stock to receiver drops off too fast. If you mount an optic, your face will be off the sight to see through it. OK, that's what an infantry guy thinks of the rifle - loved it - but not for serious work.

Edited by ElevenBravo
Link to comment
Share on other sites

I own an MR1. I bought mine used from a local gun shop in So Cal, so it is the "California" legal version. That means The rifle has the "comfort tech stock" rather than the pistol grip stock, and there is no flash suppressor on mine. All that stuff Eleven Bravo said about getting parts is true. I could not find a Manual or I.P.B. online ANYWHERE. Even Benelli does not have a down-loadable Manual on the official website. I had to request a Manual/I.P.B. from Benelli via E-Mail. (To be Fair,,,,Benelli USA responded within 48 hours with a PDF Manual and I.P.B. sent to me by E-Mail). A local gunshop is an Authorized Benelli Dealer, and they were NO help with a manual or info on parts. Got a Benelli shotgun? You are good to go!......MR1?,,,,,Good luck with THAT Brother......


Having said all that,,,,,,,Its not a Battle Rifle. Its a .223/.556 carbine sporter rifle. Great for shooting metal or paper targets at the Range. Great for shooting Larger sized varmints on your property. Great Truck rifle if you live in a hassle free State. (Alas,,,,California is not Hassle Free when it comes to firearms.:(). It wouldn't be my first choice for home defense, but you might see things differently. The rifle is well made. The Gas Piston and Bolt assembly is simple and sturdy. I doubt that it will ever Break or wear out in my lifetime, as long as it is properly maintained. And you WILL have to maintain it!... All that Hooey about the ARGO system being "Self Cleaning," is a Misnomer. You will have carbon deposits in the Gas Piston assembly after you fire the gun. If you shoot MANY rounds, you will have a LOT of carbon. If you wait a couple days to clean the rifle, those carbon deposits harden. You will then spend many tedious hours with some sort of dental tool, scraping the hardened carbon from hard to reach places. Ask Me how I know....... Do yourself a favor and clean the gun right after you go shooting.....


The rifle is a very nice shooter. The trigger is far better than whats on my stock AR 15 and the rifle is very accurate. I have no problem hitting a man sized silhouette at 300 yards shooting off hand with the iron sights, as long as the target is not moving. From a bench rest, it gets a lot easier. Thats my limit with iron sights. My peepers fail me at longer yardage.


With the comfort tech stock,,,, the percieved recoil is less than my AR. My girlfriend prefers shooting the Benelli over the AR. She says its easier for her to shoot accurately. Thats probably because the MR1 is noticeably heavier than my gas impingment (non piston) AR. Most of that weight is up front where the piston assembly is. However, its not THAT heavy, and the rifle shoulders nicely and has a nice balance.


I have Never had a problem with FTF issues. I use 10 round plastic P-MAGS without ANY issue. My MR1 has never failed to go into battery or Jammed while using my stock 5 round magazine or the P-Mags. However, I HAVE had issues with cheapie metal magazines bought from Flea-Bay. The mag springs are not stiff enough and the nose of the bullet catches on the receiver, causing a jam every 3 or 4 rounds. Use quality Magazines and you will have no problem.


Some folks have an issue with the rear sights. The rear sights are perfectly serviceable, but they are a kind of bulky and tall. The rear sight would definitely get in the way of mounting a scope, unless you used High scope rings. Personally, I would remove the rear sight (2 spline screws) if I were going to mount a scope, and use low rings. You CAN mount a Red Dot without a riser though. I did it one day just for shits and giggles.....


Eleven Bravo had a problem getting a cheek weld on his MR1 after mounting a scope. I think that would be less of a problem with my Comfort Tech stock. The Comfort Tech has a shallower Rake than the Pistol Grip stock, so your cheek rests Higher, and Closer to the sights. Also, the Comfort Tech has a replaceable rubber cheek comb. I am pretty sure you can use the Cheek combs from the R1 Hunting Rifle to customize a fit for your face......There are also some SHIMS between the Stock and the Receiver. They are probably the same shims as the R1 has, for customizing the Fit of your gun.


Do I LIKE my MR1?....Yes I DO!

Would I recommend this rifle to others?.....Absolutely!,,,, so long as you are looking for a fine Sporting Carbine.

Need a rifle for the END OF THE WORLD or the Zombie Apocalypse?......Buy an AK47;)

Edited by RedHarris
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...