Toaster Posted August 12, 2017 Share Posted August 12, 2017 Hello, how come I haven't seen many ported 18.5 M4s? Any recommendation? Thanks! Quote Link to comment Share on other sites More sharing options...
AVATactical.com Posted August 12, 2017 Share Posted August 12, 2017 Vang Comp is kinda the guy when it comes to shotgun barrel porting, but there was a specific reason he wouldn't touch benelli barrels. I can't recall the details. I could even be wrong. I would check with them and Rose Action Sports. Obviously this would preclude chokes and suppressors... Quote Link to comment Share on other sites More sharing options...
StrangerDanger Posted August 12, 2017 Share Posted August 12, 2017 I know the ones from Salient are ported. Never tried one to see how much of a reduction in recoil they provide vs the increased noise and flash generated. Magnaport may be an option. Quote Link to comment Share on other sites More sharing options...
Unobtanium Posted August 13, 2017 Share Posted August 13, 2017 Vang would not jug choke benelli barrels because of the chrome lining and the thinness of the m1 barrels. Porting a shotgun is of very minor if any benefit due to the low pressure round. It just creates more noise, flash, and hot Gass to disrupt anything placed over it (like a body part, etc) Quote Link to comment Share on other sites More sharing options...
Toaster Posted August 13, 2017 Author Share Posted August 13, 2017 Well I figure on the 18 inch barrel it's not tactical at all so might as well make it tacticool. Brakes look cool, but not on a shotgun. I don't really care about noise and flash. Sounds cool. Adds excitement. So I'd need a non choked barrel eh? Bummer Maybe I'll go the other way and look into suppressing it. Quote Link to comment Share on other sites More sharing options...
AVATactical.com Posted August 13, 2017 Share Posted August 13, 2017 I don't like brakes on benellis either... Quote Link to comment Share on other sites More sharing options...
StrangerDanger Posted August 13, 2017 Share Posted August 13, 2017 I'd consider a Limbsaver for that Magpul UBR to take some bite off of the perceived recoil. Quote Link to comment Share on other sites More sharing options...
Toaster Posted August 13, 2017 Author Share Posted August 13, 2017 VEPR? I'm in the market to get one if somebody has some leads Just having fun ricing my M4, TBH Quote Link to comment Share on other sites More sharing options...
Toaster Posted August 13, 2017 Author Share Posted August 13, 2017 I don't like the glue on the Meprolight or how they are hard to see during light. Quote Link to comment Share on other sites More sharing options...
StrangerDanger Posted August 13, 2017 Share Posted August 13, 2017 The glue? Some have sent the regular sights to tooltech and had Trijicons put in. I think they have more of the white ring around them for daytime visibility. Quote Link to comment Share on other sites More sharing options...
Toaster Posted August 14, 2017 Author Share Posted August 14, 2017 Glue in the front of the back of the rear rods Ugly Can't see them during day Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.