Tips for removing screws from Benelli M4 Butt Pad

[Milspec]

I can't even get the screws to back out close the opening/holes in the rubberized pad.

[StrangerDanger]

You need a philips head screw driver. You need to put oil on the screw driver so it will slip in to the hole. Press firmly inwards as you unscrew the bit. If it feels like it is slipping, you might want to try a different size philips.

[Milspec]

Thanks, I got that part ok.  I'm trying to completely remove the screws from the rubberized butt pad once it's unscrewed from the stock.

[jimbo45]

Try using a wooden dowel or something similar to push them out that should work.

[StrangerDanger]

Gotcha. I agree with Jimbo. You want something plastic or wood to drive the screw out with. You'll need a hammer and something to sit the pad on so the screw can be driven out.

[Milspec]

I got it with a little persuasion.

 

 

[SJPotter31]

I just had this exact problem. This forum and it's members absolutely ROCK! It seems like I can find excellent information and advice every single time I check in here. Thanks everyone!!