Trying to find a little more room in the magazine….

[SuzukiGS750EZ]

Is the wolf spring listed on their website for all 12ga the same one for the M4? Also, shell tactical sells one and also sells the wolf spring. Are all the wolf springs sold at various vendors the same spring or made differently per vendor? Also, are there any followers that allow more room or are overall a better design than factory? Haven’t had any issues with spring or follower other than capacity depending on shell but heard changing one or both may help.

[RxArms]

Our Gen 2 titanium magazine cap will give additional room for the spring, I still need to do a final measurement but I think it's around 0.25" more room than the OEM. (Compared to Gen 1 which was 0.15" more room.

our heat shield assembly also gives the same additional room in the magazine

[SuzukiGS750EZ]

1 hour ago, RxArms said:

Our Gen 2 titanium magazine cap will give additional room for the spring, I still need to do a final measurement but I think it's around 0.25" more room than the OEM. (Compared to Gen 1 which was 0.15" more room.

our heat shield assembly also gives the same additional room in the magazine

I have the heat shield on the way

[RxArms]

Okay, yes if you use our heat shield without a "spring retainer clip" in your magazine, then the spring has around 0.25" more room, and it's usually enough to get that stubborn spare shell in the tube.

[ArthurMorgan]

20 hours ago, RxArms said:

Our Gen 2 titanium magazine cap will give additional room for the spring, I still need to do a final measurement but I think it's around 0.25" more room than the OEM. (Compared to Gen 1 which was 0.15" more room.

our heat shield assembly also gives the same additional room in the magazine

When will the gen 2 be available?

[RxArms]

4 hours ago, ArthurMorgan said:

When will the gen 2 be available?

It is at cerakote right now, hopefully 2-3 weeks.

[SOCOMguy]

When someone buy a 7 RD tube, I always suggest that they first try running the OEM spring... if all functions OK, go with it. My understanding is the Benelli uses the same spring in 5 rd and 7 rd tubes. 

Joe B 

[EzGoingKev]

I could not get the seventh round in magazine. 

I tried swapping out the follower to one that was shorter. I swapped the springs out. I tried clipping some coils. None of that worked.

I installed RX's cap and that fixed it.

What are the details on the Gen2 caps?