dandy Posted April 2, 2006 Share Posted April 2, 2006 Hi, I ordered SBE2 from my local gun dealer, when I went to pick it up I noticed, that it wasn't SBE2 It was M2 Field instead. How do you put up an image??? But my question is, what is the main differens? And which one would you shoose? [ 04-03-2006, 01:26 AM: Message edited by: dandy ] Quote Link to comment Share on other sites More sharing options...
tucker301 Posted April 2, 2006 Share Posted April 2, 2006 The image must be hosted on a webserver. Use Photobucket, Hunt101 or a similar free service. When you upload the image to the server, you will be given a URL for the image. Use the URL as indicated below. On the SBEII, the top half of the receiver is mated to the barrel, making disassembly and cleaning extremely easy. The SBEII handles 3.5" shells, while the M2's maximum shell length is 3". There are other differences that have been explained numerous times here. Do a search for the term "vs". Quote Link to comment Share on other sites More sharing options...
cut emnova Posted April 2, 2006 Share Posted April 2, 2006 i asked the same question a while back and i got a great reply, check out the post. http://www.benelliusa.com/forums/ultimatebb.php/topic/1/1657.html#000000 Quote Link to comment Share on other sites More sharing options...
dandy Posted April 2, 2006 Author Share Posted April 2, 2006 Thanks, But to the knext question, which rifle is this? Isn't it a M2 field? It looks like that But look at the foregrip, it doesn't look anything like the M2, Is it possible to add an mag extension? [ 04-02-2006, 03:21 PM: Message edited by: dandy ] Quote Link to comment Share on other sites More sharing options...
dandy Posted April 2, 2006 Author Share Posted April 2, 2006 Perhaps this picture show it a little better Please help me, what do you think, should i go back to the weapon dealer and trade it for SBE2 or... Quote Link to comment Share on other sites More sharing options...
sdkidaho Posted April 2, 2006 Share Posted April 2, 2006 Check out this picture: You can read the post it came from here. Quote Link to comment Share on other sites More sharing options...
sdkidaho Posted April 2, 2006 Share Posted April 2, 2006 The M2 is the top one in that picture, the SBE2 the bottom one. Quote Link to comment Share on other sites More sharing options...
sdkidaho Posted April 2, 2006 Share Posted April 2, 2006 And if you ordered the SBE2, then that is what I would go and get. The M2 is certainly a nice gun, but if you wanted to have the ability to shoot 3.5" shells then you wanted the SBE2, not the M2. Quote Link to comment Share on other sites More sharing options...
dandy Posted April 2, 2006 Author Share Posted April 2, 2006 I think il do so, but could you tell if it's a M2 or... that's on the picture I posted? :/ Look at the foregrip it doesn't look anything like the M2 [ 04-02-2006, 03:57 PM: Message edited by: dandy ] Quote Link to comment Share on other sites More sharing options...
Remy Posted April 2, 2006 Share Posted April 2, 2006 It's not an M2-----------look at the length of the forearm and white lettering by the ejection port. It looks like a Montefeltro with a Comfortech stock. Also look at the magazine cap-------its not like an M2. And the receiver and barrel are high polish, not matte like an M2 should be. It appears to be a variant that is not available in the U.S.-----so maybe it is a "European M2'. [ 04-02-2006, 04:12 PM: Message edited by: Remy ] Quote Link to comment Share on other sites More sharing options...
dandy Posted April 2, 2006 Author Share Posted April 2, 2006 It looks a little bit odd, It doesn't say anywere on the rifle what model it is, pretty strange, And the instruktions belongs to SBE2, Anyone who can tell me, what rifle it is, cause it's shore isn't a SBE2 or M2? Quote Link to comment Share on other sites More sharing options...
Remy Posted April 2, 2006 Share Posted April 2, 2006 Dandy, I am not sure what it is, but I can tell you this-----it is NOT a Super Black Eagle because the rear "hood" of the barrel does extend back over the receiver. That extension is a classic component of the SBE design, as far as I know. Quote Link to comment Share on other sites More sharing options...
matchet Posted April 2, 2006 Share Posted April 2, 2006 rifle? huh? Quote Link to comment Share on other sites More sharing options...
tucker301 Posted April 2, 2006 Share Posted April 2, 2006 It's a European model called simply, "Comfort". Hi Res Image Stats Quote Link to comment Share on other sites More sharing options...
tucker301 Posted April 2, 2006 Share Posted April 2, 2006 dandy, The M2 and SBE2 are American models. If your dealer sold you a SBE2, then he owes you at least an apology and probably a partial refund. I'd love to know what a "variable geometry trigger release unit" is. Any mention of it in the manuals? What did you pay, in USD? Quote Link to comment Share on other sites More sharing options...
dandy Posted April 3, 2006 Author Share Posted April 3, 2006 Thanks for the help tucker, but what do you think about this rifle? Could you compere it whit M2 or SBE2? Is it better or worse? Which one would you shoose? I payed 1800$ Sweden is a expensive country whit lot's of taxes etc "variable geometry trigger release unit" What do you mean with this? Can't find anything about it in tha manual. I think i better take a talk whit my gun dealer about this, Quote Link to comment Share on other sites More sharing options...
Orphanedcowboy Posted April 3, 2006 Share Posted April 3, 2006 Does Sweden use the Euro, Franc or? Quote Link to comment Share on other sites More sharing options...
tucker301 Posted April 3, 2006 Share Posted April 3, 2006 dandy, The gun you purchased is closest to the M2. It's an excellent design, and will make a fine choice. Personally, I prefer the SBEII, for the way it disassembles and its ability to handle 3.5" shells. The variable geometry trigger release unit was mentioned on the Benelli Italy site. Orphanedcowboy, Sweden uses a currency called krona. Since I asked dandy to post the price in USD, he kindly did so. Quote Link to comment Share on other sites More sharing options...
dandy Posted April 3, 2006 Author Share Posted April 3, 2006 Thanks for the help, but does anyone know if it's even possible to buy a SBE2 in Sweden (Europe)? Because I rather think I would like to have one of those instead, I have the comforth gun at home for trial. BTW one US dollar is worth eight Swedish "krona" Quote Link to comment Share on other sites More sharing options...
dandy Posted April 3, 2006 Author Share Posted April 3, 2006 Does anyone know if its possible to add a mag extension? Quote Link to comment Share on other sites More sharing options...
tucker301 Posted April 3, 2006 Share Posted April 3, 2006 The magazine extensions fit M1 Super 90, SBE, SBEII, and M2. I'm guessing they'd also fit the Comfort, but you may want to check customer service to be sure. You can purchase a gun from a US Dealer and have it shipped through an exporter to Sweden (assuming Swedish law allows it). http://www.gunbroker.com/Support/SupportFAQView.asp?FAQID=1110&NoCount=1 [ 04-03-2006, 09:53 AM: Message edited by: tucker301 ] Quote Link to comment Share on other sites More sharing options...
Remy Posted April 3, 2006 Share Posted April 3, 2006 dandy, You may not be able to purchase a SBE II in Sweden. But, if the information posted by tucker from the Benelli Italy site is correct, you may be able to purchase the Super Black Eagle 1 model. I recently purchased a SBE 1 and I am very happy with it. It is very similar to the SBE II, but does not have the Comfortech stock. But, if you purchase an after market recoil pad such as the X-coil or Limbsaver, you may attain recoil reduction similar to the Comfortech stock. The SBE 1 fires most all forms of 12 gauge ammo just the same as the SBE II does. Personally I like the appearance of the SBE 1 over that of the SBE II. The trigger guard on the SBE 1 is metal-----the SBE II is made of plastic. If you can purchase a SBE 1----go for it-----they are excellent guns!! Quote Link to comment Share on other sites More sharing options...
dandy Posted April 3, 2006 Author Share Posted April 3, 2006 The Swedish law autorises, to bring in weapons in Sweden, but it could become a very expensive deal, cause all the taxes the Swedish goverment would add. Im going to call the Benelli factory in Europe and see if they are going to start producing SBE2, in the future, perhaps il just wait then Quote Link to comment Share on other sites More sharing options...
top gun Posted April 4, 2006 Share Posted April 4, 2006 dandy, your gun looks to be a montefeltro with composite/comfort tech stock and forearm. if your barrel lug looks like this, http://www.benelli.it/Images/Image_Visualizza.asp?SmallMenu=TRUE&ID=1289&NoDescr=TRUE it will not accept a mag extension. Quote Link to comment Share on other sites More sharing options...
tucker301 Posted April 4, 2006 Share Posted April 4, 2006 top gun is correct. I looked at the owber's manual on the Italian site and the desing is the same as the Montefeltro. A mag. extension will not work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.