Jump to content

EFLOYD

Members
  • Posts

    80
  • Joined

  • Last visited

    Never

Everything posted by EFLOYD

  1. I had it happen twice. First was firing from the hip on my own "skeet range", just for poohs and grins...after I did this and noticed the jam...I fired three more from the shoulder with not problem. So, I attempted to replicate the problem...and fired from the hip again...again it happened. So with that, I can only say it's because I had no 'backup' behind the stock to allow the inertia system to work properly. Never had a jam or misfeed of any kind in a real actual proper shooting situation....regardless of ammo load.
  2. EFLOYD

    Water stains???

    Atlantic Beach....Morehead....we took the edge of Ophelia's eye.
  3. EFLOYD

    Water stains???

    VINNYLV: I have same SBEII with walnut.....but never experienced this problem. I've used it in the salt marshes and the dove field, exposed to salt water and salt sweat....but never had a problem. I do keep a coat of RejeX wax on my wood however....a wax made by CorrosionX. Still looks like it did the day I bought it in June 2004. Sorry couldn't help....I would suggest an automotive 'cleaner/wax'.
  4. Commando: The mark is on one side of the pin head...I've noticed that as long as this mark is parallel to the bolt it's fine...ie: the mark can be on the forward side or the rear side. If the mark is not parallel, the firing pin will not go in...period. Did you have problems with the mark either in the forward position or rearward position??? Just wondering. I think we had a thread on this awhile back and determined it did not matter which side the mark was on as long as it was parallel....just trying to run it down to ground....what's your experience been??
  5. I tear mine down, bolt and all......clean it to as pristine as possible....wipe ALL parts down with CorrosionX, wipe as much off as possible, as dry as possible.....slap her back together and keep kicking.....no jams, no nothing but spent shells.
  6. Skybroom, mine works fine with anything I put through it. My first four boxes were 7/8oz Wally World $3 stuff....haven't had a problem from shot one. Good luck.
  7. EFLOYD

    a sbe ??

    I pulled mine outta the box........put four boxes of 7/8oz Wally World loads through it the next day (that's all I had laying around)...without a hiccup...several hundred rounds later of all types...still no hiccup. With the exception of about four ooollllddd drylocs I had with rust on em that had been wet a few times....simply did not fire, even though the primers were well dented.
  8. EFLOYD

    Rate the nova

    I'll give you $110.......now, fishing season is in, gotta go back over to the wet side (fishing website).
  9. My SBEII has shot everything I put in it....like mudhen.....from WallyWorld 7/8oz loads up through heavy 3.5s.....not a gliche yet. AND, has survived it's first season in the salt marshes and mud.
  10. Must be hurting for customers................
  11. EFLOYD

    Benelli K2!

    That's Crazyhiar's brother!!!
  12. I have the wood version "non-comfortech"....ordered and delivered for $1375.00 in June 2004. Did not check the synthetic, but I would think maybe a hundred or so less. Good Luck!
  13. vacuum6....I am a SBEII "shooper" and mine does shoot all loads put in it. Call me lucky or whatever, but it does cycle anything I feed it...so based on my experience, **** well worth the money. So with that, I too, think you will be happy with it.
  14. Thought that would be "hump"...
  15. Can't have one, that wasn't one of your choices Maybe that's what the other 25% was for..
  16. Now it says 50% and 75%.......that equals 125%!! That's some serious cyphering
  17. Says the same for my SBEII and I read it 100 times. But I also shot it 100 times with 7/8oz loads straight outta the box and it hasn't skipped a beat yet!! So, sometimes you feel like a nut, sometimes you don't BAM, "min recommended load, use 3dram 1 1/8oz", BAM, "min recommended load, use 3dram 1 1/8oz", BAM, "min recommended load, use 3dram 1 1/8oz", BAM, "min recommended load, use 3dram 1 1/8oz".......100 times.
  18. So far it's 100% Nova
  19. Though it may be trying at times.....persistence, patience and a little bit of nice does pay off.....she's a beauty!!
  20. EFLOYD

    New Monte

    I shoot my SBEII dry....slightly lubed. Does fine that way. I broke mine in with four boxes of low power ammo rather than high power/high priced....and it's never jammed. Also, cleaned it good straight outta the box. Though I don't have 'monte', I suggest you experiment with it a little and see what works for you. Like my truck, it calls for a certain weight oil.....but of course we all have our suggestions on brand, etc. Play with it. Also, funny your #2 post on this website would be one that bashed Benelli..... Okay tucker301, he's yours now....I don't think the upper crust rule applies here. [ 03-17-2005, 11:22 AM: Message edited by: EFLOYD ]
  21. No wear visible from the outside on mine....however the bolt slide rails do have slight wear inside the receiver, normal I would suspect. I would suspect your issue to be more serious since it triggered you to make a post....and your description of "where the bolt slides".....I would call this "NOT NORMAL"......make phone call.
  22. What's wrong with that now and then??....especially on special occasions!!
  23. .....not so here. I pasted this from another site. "We always rant and rave about sorry service, but too often do not give credit where it is due. I sent one of my old SBE's back to the factory at the end of January to get a new ejector and spring replaced. This gun is close to 15 years old and has been shot a bunch. I got a card from Benelli 10 days ago, letting me know that it was next on the bench. UPS brought it to my door yesrerday, with all new parts to replace the broken ones. They had also stripped and cleaned it from end to end. When I sent it to them, I shipped it in an old cardboard box that it came in. It was returned to me in a brand new Benelli hard carry case. They even cleaned the inside of the barrel - I never even do that. Oh yeah... All for no charge. Just wanted to give credit where it was due."
  24. EFLOYD

    SBE II wish

    Just heard an hour ago that the tuna were hit hard last Saturday.
×
×
  • Create New...