Waynefi

Nice and available for my M2, unlike the Briley. I could probably add that and a +1 end cap and get an extra round !

Thanks, what is the M3 compensator ? Can any of the above items you mentioned be bought on line ?

Where can I get or who makes this choke / adapter ? I assume you screw the bottom threads into the barrel and the bigger upper threads can be used for some type of muzzle device ? This would be for a newer M2 Tactical. Also are there any 1 piece choke/ muzzle device for the M2 ?

I wonder how many rounds that LE model is pictured ? Also what about adding additional capacity to the civilian model ?

CDM Gear sells a polyurethane pad kit for clamps to eliminate this, I have it on both my Nordic clamps.

From there you can use many flashlight mounts.

That's one of the reasons I like my Mesa Urbino stock, as you can order it with a Limbsaver made for it.

Not anymore, as a Vinci Tactical is here, order a new crystal ball !!!

2 was my guide, so after adding the Nordic extension, I added the Msa Pistol grip / stock, and the Freedom tactical follower. So, I believe that is Ok.

Anybody look at the new Vinci Tactical at the Shot Show ??

I have the Mesa and like it. You can use it with and with out the riser. I keep the riser all the way down for the ghost ring sights on my M2 tactical. I just thought you never know, and figured it made sense to have the riser available if needed.

It seems there are always many answers on this subject, and I am never sure who knows what they are talking about. But I did research specifically with the people building specialty parts for the Benelli M2. The M2 does not have as many parts to worry about as the M4. I put a Nordic extension on my M2 Tactical, and the changed the Benelli Pisiol grip stock to the Mesa and installed a Freedom Fighters tactical follower.

Ok, will be watching !

Thinking about anything for the M2 ?

Bad news ! I thought I read somewhere about a new run of these. I guess nothing to consider with the changes, to bad. Certainly worth complaining to Benelli about.

What I am using is the newer, recently released Nordic +3B. It is made specifically for the tactical 18.5" barrel models. You will only find it for sale on the Nordic site. It was designed, as I understand for some specific users (?), to extend 1/8" past the barrel to offer some protection for the muzzle without extending to far. What it also does is easily assure a 7 round magazine with a full 16" spring(beyond the end of the tube). It should hold 7 of any of what I call US shot shells, I am not sure it will hold 7 of the rolled end import style shot shells. It is about an inch longer then the +3, and about an inch shorter than the +4. It is just a matter of how much you want to extend past the barrel and or take a chance of cutting the spring to squeeze an extra round in, and any potential future problem from the short spring.

FWIW, Nordic does not seem to know why this is, and is going to see what is different if they can. As in many past cases it all lines up, including a picture of someone elses gun. I decided to trim the clamp. Did it with a dremel it came out OK. I will repaint it once it gets back from being reformed from Nordic, to fit the Benelli spacing better..

Thanks for the info Carl ! A little to involved for me, but looks very good. I needed a few inches shorter than stock and just went with the Mesa, which is also very nice.

Hi, in the picture you can see that the clamp hits the sight before it can line up in the space on the MXT tube, and cannot get tightened evenly. The space for the clamp on the tube is exactly centered so reversing the tube does not help. So my options are to change to the old EXT tube, with no space for the clamp, so I can position it where I want, OR , cut out the clamp so it fits around the front sight. So has anybody seen or had this problem ? Nordic has been very helpful in this and is also confused why this does not fit, and has suggested the above 2 options. Could be something with the gun, or a change. They are going to investigate further. Thanks, Wayne [ATTACH=CONFIG]2274[/ATTACH]

Never mind , I assumed the tube on the gun needed to fit all the way up into the collar inside the Urbino, to be screwed down, as the instructions for a Supernova to say use the slot head screw and washer that came with the package. That screw is way to short. Trying the original stock again, I realized that the tube does not fit all the way up to the collar/flange that the bolt goes through in the stock. So I put the Urbino back on and used the original long bolt that was on the gun and bolted the Urbino up , and it seems fine. I assume then the instruction for using the included screw was only for a Supernova and not a Tactical version.

Hi , anybody have any ideas ? The tube of the gun is to short and does not reach the connection point between the stock and the tube ? This is a brand new, just purchased gun, if that means anything. Thanks,Wayne

Any more info ?