-
Posts
475 -
Joined
-
Last visited
-
Days Won
13
Posts posted by les_garten
-
-
45 minutes ago, RxArms said:
I should point out only mine in that group matches slightly less weight than the OEM handle while giving benefits of hardened steel tang and ultra light and much bigger handle.
Exactly, hence why I bought it!
- 1
-
8 minutes ago, rubicon20032003 said:
I got both of rx handles .Have over a couple hundred rounds on them.Not on problem .
I think the difference is that if you look at the pic I posted, all the others have a conical taper at the bottom for the first stage/part/feel of engagement. The RX is flat. So it goes from nothing to high effort and that makes the feel different.
-
I've been afeared of doing one of these because I thought I would scratch up the receiver as it was actuated. But I like the 1911 ones.
-
18 minutes ago, D'zaster said:
My reply to Les_garten was for a different thread - sorry
I'm readin' them both at the same time as well!
- 1
-
1 hour ago, RxArms said:
Not sure what the problem is, looks normal to do me, send me a PM, or email me at [email protected].
to insert it into bolt, push and rotate.
It's working.
It's different from the others I have. They all have some "feel" as you put them in. Then the "feel" increases as you push them in.
Yours is different. There is no "feel" at all as you basically drop it in. Then a lot of resistance and then it sharply snaps in. Hard to explain it if you haven't done it. It at first feels like "somethings" not correct. You go from nothing to all of a sudden a hard push is needed. The others I have are sorta "mushy" by comparison.
How are you affixing the steel portion to the Titanium portion?
Here's the collection thus far.
-
37 minutes ago, TKAN53 said:
Go to eBay and type "oversize mag release button 1911" in the search box. sladestreettactical is the vendor I purchase mine from.
Thanx! No scratching of the receiver with this?
-
-
Bump with Price drop to $100 Shipped
-
-
When you change out these releases for say a FFT or Taran Tactical, do they scratch the receiver when you use them?
-
On 8/22/2021 at 3:21 PM, bcruze said:
Here are some pics of the clearances for the raw titanium version. There is plenty of room and the cerakote shouldn't add any measurable difference to these. Bolt closed, it's about even with the GG&G bolt release. Bolt open, it's got plenty of room as well. @StrangerDanger is likely correct, the other guy inserted the FFT bolt past the detent...I had that bolt too and didn't experience that issue.
I'm no shill for this bolt/manuf, but until (if) CC comes re-releases theirs, this one is staying on.
I was watching some M4 video on youtube the other night and saw a receiver with an aftermarket handle that was all chewed up. So overinsertion is definitely a thing. The first aftermarket one I bought would go all the way in, I tossed it.
-
I bought an LE gun originally. I put a Titanium Mag tube on it which came with Follower and Spring.
I see no reason to keep this any longer than the 6 years it has already been sitting in my closet.
In New condition. There was never a round shot or chambered in the Mag. I did use the follower for about 20 rounds.
Included:
Benelli M4 Steel Magazine from LE gun
Benelli M4 Red Follower
Benelli 7 Round SpringPrice: $150 shipped CONUS
-
18 hours ago, StrangerDanger said:
Near the end where the battery’s positive terminal is smashed in presumably from recoil.
I only saw the issue with one battery. So I’m not sure if it’s a fluke or not yet.
Don't think it would be a Fluke. I only Run 123A batteries in weapon lights. I was surprised that Surefire went the Dual Fuel route. I took that 18650 battery and am using it in my Flashlights. The idea about not training with batteries in place seems like a good idea.
- 1
-
54 minutes ago, First2Bust said:
I’m ordering the Benelli M4 Improved Choke from the link above, but I would prefer one in Black to match my M4’s color. Does it exist? Thanks.
Briley has a lot of Black chokes
-
On 8/25/2021 at 5:37 PM, Sukhoi_fan said:
No. Sold within three hours on feebay for $995.00 plus sales tax.
Ohhh man, 3 hours! That always makes me think I didn't ask enough for something!
-
9 hours ago, Unobtanium said:
https://pistol-forum.com/showthread.php?46767-1301-Light-Solution
Curious if you've seen this with any lights (battery issues).
Which post in that thread are you guys referring to?
-
6 hours ago, StrangerDanger said:
Glad to help. The light looks good! Stay away from the Modlite website!
I did go there... More than once I must admit... But I looked in the mirror one morning and said to myself, "are you freaking crazy" I won't divulge what the answer was here, but I ain't been back.
-
-
So I had the Original AVA Tactical mount and had bought an Elzetta light to use with it. Got a good deal on the Elzetta on FleaBay. First time went to shoot the gun, the Elzetta pulled the ripcord and easily escaped it's restraint. The mount would not hold that light. Probably could have used some InnerTube material and got it clamped down, But I would have always been suspicious of it. Stranger Danger steered me to the Impact Weapons mount. Still needed another light though...
The Surefires M600DF looked nice but High $$$. told me a while to make that leap but I just did and I have to say, they make nice lights, and strangely lightweight for their size. Glad I got it, never owned a Surefire before, now I kinda get why people like them.
The Elzetta weighs 5.9 oz. and the Surefire weighs 4.6 oz., so that's a good thing saving 1.3 oz. SF is a little longer which will help with unshrouding the light a bit, the Elzetta threw a pretty big barrel shadow.
Also, the Surefire ran 3 hours on the 18650 Battery that came with it, amazing!
The Impact Weapons mount is really light and get's the job done perfectly, low drag as well compared to the AVA mount.
The Impact Weapons folks extended the combination discount for the Surefire/Mount combo even though I had bought the mount quite a while ago. Thanks Earl Pitman for the discount after the fact! He seems to carry his phone around and answer it 24 hours a day, 7 days a week... With the discount the light was like $5 more from Impact, but I think those $ went to a good company for sure.
StrangerDanger turned down the SureFire Switch for me and everything is ready to mount up now. Nice to have SD as my personal Gunsmith!
I'd like to say thanx to everyone who helped me out on this!
Here's some PIX:
- 3
-
49 minutes ago, Sukhoi_fan said:
C stock is sold.
The last one I sold for $265.00 shipped and it only took six weeks of being listed on this forum. The buyer registered on this forum just to purchase the C stock and hasn't been back since then. I figured if someone wanted a deal on a Benelli item they'd show up on the Benelli forum. I was wrong. lol
Did you sell on ARF?
-
17 hours ago, StrangerDanger said:
He last visited the site on August 14th. So I imagine he’ll see it soon enough.
Ahhh, I didn't think to look at that, thanx!
-
-
Quote from the Strangest man in the World:
I don't come here often...
But when I do, I order another new Bolt Handle
- 2
-
I need to get the PDF, Anatomy of the M4.
FFT Oversized Bolt Release Button - New Product
in Benelli
Posted
Could you post a pic of how it looks?