RxArms

Nice! Too bad all of us were too lazy to reach out for the past couple months! Good on ya.

If never had any issues with the firing speed either. Further, I’d never take a knockoff panzer into war. Yes it’s worth the extra money, it is after all made in Italy and not turkey.

By this time next year I’ll have more items you’ll want!

If this barrel is the same as the USMC issued M1014 barrel then slugs are fine. USMC would be shooting slugs out of the same barrel.

Re: Ti cap, I think the main reason shooters want it, is to have a solid piece of metal at the end, holding the gun together. Instead of the steel/polymer injected end cap. And because it’s…. Titanium! With some creative engineering I was able to get the weight below the OEM but just barely. I’ll know more once it’s machined and I can weigh them but modeling puts the weight at 1-2 grams lighter than the steel/polymer OEM cap.

titanium got held up at the border, but machining is starting this week though. They are a time consuming piece to machine due to the titanium. I will wager 1-2 months before they are in stock.

Hey All, These are now in stock and shipping to USA/Canada etc. Made from 4140 steel, AMBI mount which provides a rotation limited mounting option on both sides of the buttstock. You can pick it up at www.rxarms.com

These are now available for shipping at rxarms.com

These are now in stock and shipping. Thanks!

Probably Q4 if all goes smoothly, which it never does..

I wish I could say more but I’m deep in R&D on a system that is unobtrusive, Will mount the light near the muzzle and comfortably mount a remote switch near the handguard. It also takes down with no tools. Im not ready to disclose more, and this isn’t a plug, but if you want details in the future you can sign up on my newsletter at www.rxarms.com (I only email out once every few months when new products are available).

Can’t you use Esstac shotgun cards? Or are you only allowed to use this side armour brand? Seems like a lot of effort for a heavier and more bulky system.

They are at black oxide right now. Around a week. Then I need to quality check them. I would say 1-2 weeks..

I have a QD sling mount available soon, 4140 steel. Machining is complete, just waiting for surface finishing… https://rxarms.com/products/benelli-m4-parts-and-accessories/benelli-m4-qd-sling-mount-rear/

Well I wish you the best brother.

A leather mag cap doesn’t sound so great… The storage compartment will be US$34.

I was able to get the price down cheaper than I thought I would. Planning to sell the mag caps for $98 USD.

Those are being machined right now. I would wager 4-5 weeks optimistically.

Hey All, This new product will be available for purchase in a couple weeks. The storage compartment gives the Benelli M4/M1014 shotgunners to store small items in the collapsible stock. Easily access the compartment using the charging handle as a tool to pop open the lid. Can store a single CR123A, or a single AA battery, along with a small tool like a torx or hex key if needed and a little space to spare on the upper part of the compartment (just to give an idea on size). It is a tight fit to insert and remove items, but I tested a AA battery, and CR123A battery both in baggies, and had no issues getting them in and out. Installation is very easy, just remove the comb, put the unit in the empty space, and put the comb back on. The existing screws on the comb hold the compartment firmly in place after the comb is re-installed. Features drainage slots on the bottom of the design, to allow for water to drain should the weapon get submersed in water. Feel free to sign up at rxarms.com on the waitlist to get notified when it is in stock if you are interested! A CR123A wrapped in a small baggy, and a hex tool (pictured above)

Have you has durability problems with lightening cuts on the surefire picatinny? as long as the cuts are engineered properly I see no reason why materials can’t be removed to lighten gun accessories and parts.

Polymer forend is 5oz. that Benelli forend is a cash grab, poorly designed and implemented, considering the proprietary accessory attachment system they are using. Benelli could have easily gone with mlok which is at this point an industry standard. the ergos also do not compare to the polymer forend as far as I can tell, I haven’t held the metal one but doesn’t look nearly as comfortable. Just in my opinion of course.

Lots of plastic on there. Honestly a plastic tube cover on the mag tube that holes the whole gun together… I don’t get all the plastic parts beretta chose to go with. it would be a much better quality firearm if they increased the Price $100 and used metal components. No field stripping without tools either with that clamp on the end.

Singuard does good work I also had a pair done.

To be honest I slap my bolt release tab a lot because it’s…. Fun. Never had any problems with the OEM handguard and my bolt release being slapped to release the bolt. some differences are mine is 1075 spring steel at 45RC. Those other speed bars are 4140 at 30 Rockwell or so. Big difference in stiffness.

This is why I use a hardened stainless steel tang combined with a titanium handle. best of both worlds.