DEBWB

I'm interested in the IWC light mount a lot of members seem to have/ use. My main hesitation is what prevents marring of the tube finish ? Is there some type of rubber material lining the contact area. Also, I have a Streamlight TLR-1 I would like to mount on the gun. It has a built in pic rail mount so I presume I would just need to purchase a pic rail adapter for the IWC mount? Thanks in advance for opinions

Has anyone seen or purchased the new 11733 ? My FFL claims only LE can purchase, but I've asked several FFL Gunbroker sellers and they say anyone can purchase as long as legal in your state.

Thanks SD, I thought these were just drop in and go. Not sure I have the gun-smithing skills to deal with all you mention. With my luck; I'd have to contend with all you describe. Itching to add my 2 shell extension and need 3 USA parts for 922R. The mag follower is easy, but I'm wondering if the hand guard would count as 2 parts since it's a 2 part system.

Just curious, since you haven't shot your gun yet; what's wrong with your barrel ?

Even though I'm in the process of making sure I'm 922R compliant with my m4; this crap is such BS it makes me steam to no end. Sporting purposes ? Don't see that in the 2A. This bureaucracy needs to be abolished once and for all. Making up "rules" to fit their political views. Something legal today then illegal tomorrow. And it seems to be worse now than ever.

So where did the heat shield on this one come from... ? I like it a lot better than the one on the new m4.

Again, thanks to all that have responded. At this point; I have been convinced to stay with the OEM guards. I'll install the BenelliParts trigger package for 922R and slap on the 2 round extension tube. Still wondering when they switched from aluminum to polymer guards though...

Thanks everyone for responding to my topic. All comments are very helpful and appreciated. I planned on purchasing and installing the BenelliParts.net trigger kit for 922r and was wondering if I should do the aluminum guard as well. Initially, I was going to buy the Benelli OEM aluminum guards ($148 ea), but it seems it's hit/miss if you get one without defects. The A & S trigger guard appears to be of high quality, but is quite expensive ($229 ea). Just not sure if it'sworth the extra cost for the casual shooter. I just don't see myself being that aggressive with the loading.

Can someone give me a brief history of when the aluminum trigger guard/ housing to polymer occurred on the M4s? I have an 11718 I purchased new 10-2016 and an 11795 on 7-2020. I'm assuming the 11795 is polymer, but not sure about the 11718. For the occasional shooter; is it worth switching out a polymer guard/ housing for aluminum? I believe SD recommends A&S Engineering over the Benelli OEM aluminum. Any insight much appreciated.

I'm thinking of ordering the Benelli M4 / M1 M2 M3 922r trigger undiscouraged kit from BenelliParts.net and before I plunk the money down; I was wondering if any forum members have current first hand purchase experience with them in 2022. Reading previous forum topics, concerning BenelliParts.net; it looks like most complaints concerned pre-orders. The website shows in stock; so pre-order would not come in to play.The trigger kit, itself, is showing positive reviews on their website. I don't want to stir up any old issues; so please just current experience. I know FFT has a kit, but the cost difference is quite significant which may be due to FFT including springs. I don't want to change springs; I'm just interested in 922R compliance when I add a 2 round extension tube. BTW, can someone tell me what undiscouraged means in the description for this kit ? Thanks

Thank you for the response.

Wondering if anyone has purchased the magazine follower from Benelliparts.com that says its 922R. Are they actually made by Benelli or are they secondary market. Would like to know if they are stamped USA. Not sure how you would prove its USA part unless stamped. I know FFT sells them, but was trying to keep it Benelli if possible. Thanks

After starting this topic; I started to think it probably was a very unusual loading method. Still wouldn't mind finding out if they even make one for this shotgun. I think I would like the look; not necessarily need it... Thanks everyone for commenting.

I know this is late in the game for this post, but I just reviewed SDs "Complete Trigger Group Assembly" and it is excellent!!! It gave me enough confidence to go ahead and buy the TTI Benelli AccuGuide Extended Carrier. Very descriptive and well organized; thanks SD !!!

Maybe I should ask if anyone here has actually added one of these, thinks this would be a good mod or totally unnecessary??? I'm still not sure one even exists. Maybe it was just the way he was loading it; upside down with stock resting on his shoulder and muzzle point down.

Yes, this is more like what I thought youtuber was talking about. He definitely said barrel heat shield.

I did a search before asking this question because I'm sure its been discussed before, but couldn't get a hit. I was watching a youtube, of someone shooting their M4, and they were complaining about the barrel being hot when reloading. He said he was going to buy a heat shield, but failed to mention what brand he was going to buy. Doing some internets searching; I see ATI mentioned quite a bit, but that seems to be more of a quad rail addition than a heat shield. I don't want to make any modification to the shotgun; just a bolt-on is my goal. Any recommendations, opinions or experiences would be greatly appreciated. Thanks

I added a DMW extension to my M4 and they sent a spring with i... I didn't install their spring and just out of curiosity; I loaded with the stock 5 round spring in place. It's been a while since I did this, but I think I barely got 7 rounds in with the stock spring... Is that possible ? Or maybe 6 -3".

Thanks everyone for responding to my question. I enjoy reading all the recommendations and experiences. Hopefully we can get a few more... Normally I don't buy something without researching first, but in this environment and on the site I purchase from; popular brands/ models(???) are gone if you look away or blink. To Diesel79; yes unfired. Thanks again everyone

I purchased the Arms Unlimited when it was on sale; I haven't installed it yet; has anyone used the AU handle; if yes; how was/ is it working? Thanks

I recently purchased some Federal Law Enforcement 12 Gauge Ammo LE127RS for my shotguns. Overnight I started to realize I should have made sure it would actually function in the M4 before purchase; not after. here are the stats if anyone could enlighten me; would be a great help: Bullet Type Hydra-Shok Rifled Slug Muzzle Velocity 1300 fps Muzzle Energy 1655 ft. lbs Primer Boxer Casing Brass Casing Thanks Also, Is there an ammunition table, somewhere, of what is known to work/ not work?

Thank you for the heads up on Sig Talk. I found a discussion there about the specific model I'm looking at and what the "W" designates. Thanks again

Thanks for the link; I'll check it out.

I'm pretty sure it means something specific about the pistol. Thank you for responding.

Hopefull it is permitted to ask a non Benelli question on this forum? If not, I apologize and please delete. If yes, I'm thinking of purchasing a Sig Sauer P226, WE26R-40-BSS-SRT. I believe it to be discontinued and cannot find any particulars on this pistol. I'm trying to find out what the "W" designates. There seems to be plenty of information on the model without the "W". Any help is appreciated.