Ceephus

Me too, but I gotta admit being able to simply push a button and push/pull to adjust versus having to twist would be nice.

Good gravy. Nice catch.

Shit. I don't need any more shotguns but now they are making me want a 1301.

Such as? Advantages I mean.

RxArms cap is externally the same length as OEM.

It's hard to say. When I got my M4 I ran and still run Federals because I had 6 cans of the stuff. My OEM spring wouldn't fit 5 rounds (I have a shortie with a 5rd tube) I clipped coils 1 by 1 until they fit, ended up clipping 3 I believe. Later I bought a CarrierComp spring and didn't have to clip it at all. I also put a flat faced follower in there versus the OEM which had a slight protrusion, and after all that, I can get 5 in there no problem. There is NO wiggle room, meaning when I get that last round in and it clicks, it's not moving forward any further. I also slightly pulled my spring retainer out a bit and let the mag cap push it back down so it would protrude as much as possible versus sitting flush. It all works through a couple thousand rounds now. Federals just run long, it's a common issue with M4s. RxArms makes a titanium mag cap that has a deeper well that gives you more room than the OEM cap as well too. Also about feeding reliability after cutting the coils, I ran 500+ rds through mine to test, it fed fine, no hiccups.

Start with 1 coil and work your way down.

😂 half the material and 3 times the price. He can fuck right off. Dude has no shame.

Sounds like they did a "backbore" job like Vang Comp does on Remingtons and Mossbergs, but wouldn't ever do on Benelli M4s because of the barrel lining or barrel thickness I believe?

Buy both. You only live once.

"I see grey matter."

I've got an extra RxArms titanium endcap in black Also have a TTI safety in black

That is nice. I'm about to install a matchsaver and I could just go mlok instead with this and not have to drill.

Mine was manufactured in 2021. Came with the polymer handguard. What you say makes sense and the one you linked looks the same. To the OP I'd just take it to the hardware store and match it up for spares.

I don't know. Mine has that washer. But I checked Numrich and Midwest Gun Works and that washer doesn't even show up on the schematics.

Tacord does good business. They will ship to the US, you just have to email/message them and work out payment and they will hold up their end. I've bought some parts from them, just had to communicate.

Nice build, I just saw it on Reddit. I kinda like that foregrip, is it rubbery? Does Toni Systems make it too?

I have 2 sets, they are stippled though. If you're interested DM me

I have heard good reviews about the Briley triggers, you have to send them your whole housing so they can fit it for you. I thought about it, but chose instead to go with an OEM aluminum trigger guard, some Wolff trigger group springs for reliability, I didn't change any pull weights. And I lucked up on a Geissele hammer and threw that in. Thats it, I don't plan on doing anything else to it other than shooting it alot to smooth the action out. But if I had to recommend any kit, I'd go with Briley based on the feedback I've heard from people who actually use them.

lol so that was you 2. Congrats.

Caught me sleepin

Got a link?

Her first snow

I just like my guns short unless I'm hunting. Tax stamp addiction is a real thing.

...... Arsonists day and night you say... 🤔