Unobtanium Posted October 13, 2009 Author Posted October 13, 2009 I will PM you the info if you publically state in this thread that you will use a heat-gun to remove your OEM castrated tube if you procure the OEM one. Quote
sneakerfreak602 Posted October 13, 2009 Posted October 13, 2009 (edited) Interested in your oem tube send me a pm. I'm gonna install myself not use a gunsmith. Edited October 13, 2009 by sneakerfreak602 Quote
jon.benton Posted October 14, 2009 Posted October 14, 2009 I'd like to see how many/how much they are. Any pics? Quote
Unobtanium Posted October 14, 2009 Author Posted October 14, 2009 $100 a pop and they show slight wear and still have the green lock-tite on them, which is how I can vouch for it being OEM. I also have seen other items from this seller, he is legit in his marketing. Not my product, btw. There are only two available at this time and Cody6.0 has first dibs on the PM after his public announcement is made Quote
cody6.0 Posted October 14, 2009 Posted October 14, 2009 If I can get a OEM tube of course I would heat my M4's reciever. Quote
Unobtanium Posted October 15, 2009 Author Posted October 15, 2009 If I can get a OEM tube of course I would heat my M4's reciever. PM sent, will post link in thread within 12 hours, so move fast : ) Quote
Fmlyman Posted October 15, 2009 Posted October 15, 2009 I would like to purchase 1 of your Benelli Factory full lenght mag tubes. I will use a heat gun on my reciever to insatall...Thanks Quote
flya727 Posted October 15, 2009 Posted October 15, 2009 I will take one and heat treat the receiver! PM'd you also. Rick Quote
flya727 Posted October 15, 2009 Posted October 15, 2009 Well, looks like I am too much of a new guy to PM yet. Really need one. Could you e-mail or call me? Funds will be sent ASAP. I was the one who started the thread about these a few weeks ago. Thanbks, Rick 352-455-8357 [email protected] Quote
Unobtanium Posted October 15, 2009 Author Posted October 15, 2009 Please read the whole thread. They are not mine. There are only 2 of them. I am only directing people to them, and there has been a LONG standing battle over Cody6.0 not wanting to heat his reciever for some reason or another and going on and on about it in numerous threads. If I can get him to sack up and add a real magazine to his M4 (He is a stickler for OEM Benelli parts, even if they are mechanically inferior to Kip's tubes), I will do it. If he doesn't get to them within 12 hours (by the time I wake up in the morning), the link will be posted here. Remember, there are only 2 of these. They are being sold by a reputable seller and the green OEM style locktite is visible on the threads, further lending credit to their OEM status. Quote
flya727 Posted October 15, 2009 Posted October 15, 2009 Trying to contact you again via PM. Really need this! Thanks, Rick Quote
Renault Posted October 15, 2009 Posted October 15, 2009 what's so good about OEM? kips are glorious!!! Quote
cody6.0 Posted October 15, 2009 Posted October 15, 2009 Just like to keep it all Benelli Exactly... Quote
flya727 Posted October 15, 2009 Posted October 15, 2009 Unobtanium, I have tried 10 different ways to contact you and all have failed, I am a new guy. Could you please contact me at the below contacts, as I REALLY need one of these tubes. I can fax my Fed LEO creds to the man if it helps. Sorry to be so forum new in this matter, but I have A+ ratings at HKPRO. Thanks for any help. Capt. Rick Miller [email protected] Cell:352-455-8357 Quote
Unobtanium Posted October 15, 2009 Author Posted October 15, 2009 http://www.ar15.com/forums/topic.html?b=7&f=47&t=715552&page=1 Someone did mention that these looked like 5-shot tubes, so wait until the guy responds. I just cannot imagine someone selling 5-shot OEM tubes, however, if it is possible. I WOULD NOT BUY until I knew what it was for sure. Quote
Unobtanium Posted October 15, 2009 Author Posted October 15, 2009 Unobtanium, I have tried 10 different ways to contact you and all have failed, I am a new guy. Could you please contact me at the below contacts, as I REALLY need one of these tubes. I can fax my Fed LEO creds to the man if it helps. Sorry to be so forum new in this matter, but I have A+ ratings at HKPRO. Thanks for any help. Capt. Rick Miller [email protected] Cell:352-455-8357 Why are you so into an OEM tube when better is out there? Is there a reason? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.