CGray97 Posted May 3, 2020 Share Posted May 3, 2020 (edited) Recently picked up a vinci on trade. Love everything about the gun as I’ve owned one previously. However, took it out to shoot the other day and ran some light dove loads through it...I’m running into issues here. I ran several sets of 3 shells through the gun. Mostly Remington, a few fiochhi. What I noticed is how slow the bolt closes back after a shot goes off often causing a FTE and failure to feed the next shell and also notice how slow the gun is throwing the shells....I ran a 3” turkey load through it and it did just fine, ejected and locked the bolt back no problem. I’m curious if anyone has experienced this as well? I’ve heard maybe replacing recoil spring? Just seems with the lighter loads they aren’t producing enough power to eject and feed the next shell. Any help would be greatly appreciated and I apologize for not knowing all the technical terms. Edited May 3, 2020 by CGray97 Quote Link to comment Share on other sites More sharing options...
remarkable Posted May 3, 2020 Share Posted May 3, 2020 PM Sent Quote Link to comment Share on other sites More sharing options...
StrangerDanger Posted May 3, 2020 Share Posted May 3, 2020 Any chance a Wolff extra power recoil spring has been installed? Quote Link to comment Share on other sites More sharing options...
CGray97 Posted May 3, 2020 Author Share Posted May 3, 2020 47 minutes ago, StrangerDanger said: Any chance a Wolff extra power recoil spring has been installed? Not that I know of, I was under the impression there were no aftermarket springs for the Vinci? Quote Link to comment Share on other sites More sharing options...
StrangerDanger Posted May 3, 2020 Share Posted May 3, 2020 You’re right. My searched showed some, but they weren’t actually for the Vinci even though they came up. Have you thoroughly disassembled and cleaned it? Tension on the hammer feels normal? Any aftermarket modifications done to it including buttpads? Have you tried different lubricants? Do you have an idea of how many rounds have been fired thru it? Quote Link to comment Share on other sites More sharing options...
Steve Rose Posted May 4, 2020 Share Posted May 4, 2020 11 hours ago, CGray97 said: Recently picked up a vinci on trade. Love everything about the gun as I’ve owned one previously. However, took it out to shoot the other day and ran some light dove loads through it...I’m running into issues here. I ran several sets of 3 shells through the gun. Mostly Remington, a few fiochhi. What I noticed is how slow the bolt closes back after a shot goes off often causing a FTE and failure to feed the next shell and also notice how slow the gun is throwing the shells....I ran a 3” turkey load through it and it did just fine, ejected and locked the bolt back no problem. I’m curious if anyone has experienced this as well? I’ve heard maybe replacing recoil spring? Just seems with the lighter loads they aren’t producing enough power to eject and feed the next shell. Any help would be greatly appreciated and I apologize for not knowing all the technical terms. What is the velocity (or Dram Eq.) and shot weight of the problematic ammo? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.