RxArms Posted April 18 Share Posted April 18 (edited) Hey All, This new product will be available for purchase in a couple weeks. The storage compartment gives the Benelli M4/M1014 shotgunners to store small items in the collapsible stock. Easily access the compartment using the charging handle as a tool to pop open the lid. Can store a single CR123A, or a single AA battery, along with a small tool like a torx or hex key if needed and a little space to spare on the upper part of the compartment (just to give an idea on size). It is a tight fit to insert and remove items, but I tested a AA battery, and CR123A battery both in baggies, and had no issues getting them in and out. Installation is very easy, just remove the comb, put the unit in the empty space, and put the comb back on. The existing screws on the comb hold the compartment firmly in place after the comb is re-installed. Features drainage slots on the bottom of the design, to allow for water to drain should the weapon get submersed in water. Feel free to sign up at rxarms.com on the waitlist to get notified when it is in stock if you are interested! A CR123A wrapped in a small baggy, and a hex tool (pictured above) Edited April 18 by RxArms 1 2 Quote Link to comment Share on other sites More sharing options...
rubicon20032003 Posted April 18 Share Posted April 18 When’s those titanium end caps coming available 2 Quote Link to comment Share on other sites More sharing options...
RxArms Posted April 18 Author Share Posted April 18 1 minute ago, rubicon20032003 said: When’s those titanium end caps coming available Those are being machined right now. I would wager 4-5 weeks optimistically. 2 Quote Link to comment Share on other sites More sharing options...
rubicon20032003 Posted April 18 Share Posted April 18 Any idea on price .Can’t wait I need a few Quote Link to comment Share on other sites More sharing options...
RxArms Posted April 18 Author Share Posted April 18 (edited) 1 minute ago, rubicon20032003 said: Any idea on price .Can’t wait I need a few I was able to get the price down cheaper than I thought I would. Planning to sell the mag caps for $98 USD. Edited April 18 by RxArms Quote Link to comment Share on other sites More sharing options...
rubicon20032003 Posted April 18 Share Posted April 18 1 minute ago, RxArms said: I was able to get the price down cheaper than I thought I would. Planning to sell the mag caps for $98 USD. Nice that’s a good price 1 Quote Link to comment Share on other sites More sharing options...
kenw111 Posted April 18 Share Posted April 18 31 minutes ago, RxArms said: I was able to get the price down cheaper than I thought I would. Planning to sell the mag caps for $98 USD. As a leather worker, you inspired me to make the same thing, out of 4 ounce (thickness) leather for about $25 each. 1 Quote Link to comment Share on other sites More sharing options...
RxArms Posted April 18 Author Share Posted April 18 (edited) 2 minutes ago, kenw111 said: As a leather worker, you inspired me to make the same thing, out of 4 ounce (thickness) leather for about $25 each. A leather mag cap doesn’t sound so great… The storage compartment will be US$34. Edited April 18 by RxArms Quote Link to comment Share on other sites More sharing options...
kenw111 Posted April 18 Share Posted April 18 46 minutes ago, RxArms said: A leather mag cap doesn’t sound so great… The storage compartment will be US$34. its just a storage compartment for battery etc. / lost charging handle. doesnt sound great? who prefers plastic over quality leather? Last leather item i made was a $1200 scabbard for a top quality AK47 made out of green alligator. 1 1 4 Quote Link to comment Share on other sites More sharing options...
RxArms Posted April 18 Author Share Posted April 18 Well I wish you the best brother. Quote Link to comment Share on other sites More sharing options...
Ceephus Posted April 20 Share Posted April 20 (edited) I'm definitely in for one of these sir. 👍 Edited April 20 by Ceephus 1 Quote Link to comment Share on other sites More sharing options...
RxArms Posted May 1 Author Share Posted May 1 (edited) These are now available for shipping at rxarms.com Edited May 1 by RxArms 1 Quote Link to comment Share on other sites More sharing options...
Ceephus Posted May 2 Share Posted May 2 Still expecting those titanium end caps to be ready this month? Quote Link to comment Share on other sites More sharing options...
RxArms Posted May 2 Author Share Posted May 2 1 hour ago, Ceephus said: Still expecting those titanium end caps to be ready this month? titanium got held up at the border, but machining is starting this week though. They are a time consuming piece to machine due to the titanium. I will wager 1-2 months before they are in stock. Quote Link to comment Share on other sites More sharing options...
brightt Posted May 2 Share Posted May 2 (edited) what are the benefits of the TI end cap? weight savings and strength? whats the weight savings in oz? just saw your QD adapter for the stock, pretty sure my iwc is only on one side, may pick up that one for the ambi capability, storage department and end cap, probably end up picking up one of thise TI CH's as well! good stuff Edited May 2 by brightt Quote Link to comment Share on other sites More sharing options...
RxArms Posted May 2 Author Share Posted May 2 39 minutes ago, brightt said: what are the benefits of the TI end cap? weight savings and strength? whats the weight savings in oz? just saw your QD adapter for the stock, pretty sure my iwc is only on one side, may pick up that one for the ambi capability, storage department and end cap, probably end up picking up one of thise TI CH's as well! good stuff Re: Ti cap, I think the main reason shooters want it, is to have a solid piece of metal at the end, holding the gun together. Instead of the steel/polymer injected end cap. And because it’s…. Titanium! With some creative engineering I was able to get the weight below the OEM but just barely. I’ll know more once it’s machined and I can weigh them but modeling puts the weight at 1-2 grams lighter than the steel/polymer OEM cap. 1 Quote Link to comment Share on other sites More sharing options...
Ihrinwe Posted May 2 Share Posted May 2 I’ll be getting the storage compartment and the end-cap once they are both ready. Need to install my six position tube as well. 1 Quote Link to comment Share on other sites More sharing options...
Ceephus Posted May 3 Share Posted May 3 I needed a place to store my tax stamp and a spare T2 battery. And some Skittles. Genius bro. 🫡 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.