RxArms Posted June 16, 2023 Share Posted June 16, 2023 Hey all, Finally got these in stock, offering a black cerekote, or raw blasted titanium finishes. If you're interested you can pick yours up at www.rxarms.com 3 Quote Link to comment Share on other sites More sharing options...
rubicon20032003 Posted June 16, 2023 Share Posted June 16, 2023 1 ordered to see if I need a few more 2 Quote Link to comment Share on other sites More sharing options...
RxArms Posted June 17, 2023 Author Share Posted June 17, 2023 1 hour ago, rubicon20032003 said: 1 ordered to see if I need a few more Nobody NEEDS titanium… it’s more of a compelling desire 3 Quote Link to comment Share on other sites More sharing options...
RxArms Posted June 17, 2023 Author Share Posted June 17, 2023 10 minutes ago, EzGoingKev said: I see you list the weight of your part at 35.4 grams. You say it is less than the OE part. What does the Benelli part weigh in at? It barely clears OEM which weighs at 36.2g. Quite a feat actually since 75% of the OEM cap looks like polymer. Quote Link to comment Share on other sites More sharing options...
brightt Posted June 18, 2023 Share Posted June 18, 2023 On 6/16/2023 at 8:18 PM, RxArms said: Nobody NEEDS titanium… it’s more of a compelling desire but its Awesome! Quote Link to comment Share on other sites More sharing options...
jsr1014 Posted June 19, 2023 Share Posted June 19, 2023 These are very nice, I want one, someday soon! Quote Link to comment Share on other sites More sharing options...
les_garten Posted June 23, 2023 Share Posted June 23, 2023 On 6/18/2023 at 8:42 AM, brightt said: but its Awesome! And can we really assign a Value to awesomeness... Quote Link to comment Share on other sites More sharing options...
Ihrinwe Posted July 4, 2023 Share Posted July 4, 2023 Not that there is ever a question with @RxArms products but received and installed this today. Good quality and screwed on with absolutely no problem. 1 2 Quote Link to comment Share on other sites More sharing options...
RxArms Posted July 4, 2023 Author Share Posted July 4, 2023 (edited) I did forget to mention, that if you use my cap on a tube without a retaining spring, you will get an extra 0.15” of spring space Vs the OEM. I know 7 shell in the tube is tight with certain loads. The 0.15” extra might be able to give that little bit more that is needed. I tried to hollow out the cap as much as I could to give more room for the spring. Edited July 4, 2023 by RxArms 3 Quote Link to comment Share on other sites More sharing options...
StreetSweeper56 Posted July 4, 2023 Share Posted July 4, 2023 This really is a critical part. I had to ask myself, "Do I want a polymer part holding my M4's together or titanium?" The slight extra space your cap affords sealed it, so I ordered 3, thanks Robb! 1 Quote Link to comment Share on other sites More sharing options...
StreetSweeper56 Posted July 27, 2023 Share Posted July 27, 2023 3 hours ago, EzGoingKev said: Can anyone confirm they were able to load 7 shells where they could only load 6 with the Benelli cap? It depends on the shells which varies in size between manufacturers, I have been using Fetter which I could always load 7 with. The caps don't give a lot of new space so it likely will not make a HUGE difference. The new caps are really nice though. The raw titanium looks especially nice. Quote Link to comment Share on other sites More sharing options...
RxArms Posted July 27, 2023 Author Share Posted July 27, 2023 I toyed with the idea of making a different design altogether, more straight out without the 3 large circles machined into it. But in the end, I find benellis cap design quite beautiful so decided to keep the classic look of the cap even though I probably could have achieved 1/4” to 1/2” more spring space. 1 1 Quote Link to comment Share on other sites More sharing options...
Ceephus Posted July 27, 2023 Share Posted July 27, 2023 Got mine in the mail today. Machined beautifully and I'm happy with it. Keep up the good work bro. Quote Link to comment Share on other sites More sharing options...
Fullassault Posted July 28, 2023 Share Posted July 28, 2023 On 6/16/2023 at 7:56 PM, RxArms said: Hey all, Finally got these in stock, offering a black cerekote, or raw blasted titanium finishes. If you're interested you can pick yours up at www.rxarms.com Do these work ok with the Ti CC tubes? I don’t know much about titanium, didn’t know if there would be any binding issues Quote Link to comment Share on other sites More sharing options...
rubicon20032003 Posted July 28, 2023 Share Posted July 28, 2023 12 minutes ago, Fullassault said: Do these work ok with the Ti CC tubes? I don’t know much about titanium, didn’t know if there would be any binding issues I run them on a compcarrier titanium tube no problems 1 Quote Link to comment Share on other sites More sharing options...
RxArms Posted July 28, 2023 Author Share Posted July 28, 2023 58 minutes ago, Fullassault said: Do these work ok with the Ti CC tubes? I don’t know much about titanium, didn’t know if there would be any binding issues Ya as mentioned above it should install no issue, a thread is a thread. As long as the tube is machined correctly with proper thread tolerances the cap will work. 1 Quote Link to comment Share on other sites More sharing options...
Ihrinwe Posted July 28, 2023 Share Posted July 28, 2023 Can confirm that it works, have it on my CC full length tube. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.