All Activity

FYI... Out of the eight (8) new Benelli shotguns with mfg dates from 2023 we've received at work here on base, half of them have the simple c-clips and the others have the more stout snap rings on their trigger housings. I would have thought the snap rings were going to be more preferred by Benelli for their scatterguns over the easy to lose/easy to misshapen c-clips...

I’m at a loss trying to find any install instructions before I buy. Does the new OEM rail handguard install the same as the original plastic OEM handguard? thanks!

When did Chrome Lined appear in the M1 line? We know there are many barrels of the M1 to include the extension that are blued. Any help appreciated.

I hear you lol. If you pickup any leads let me know!

does anybody else have this on there M2/SBE?

Call Benelli directly and they’ll put you on a list for that and other parts. When they pop up, you’ll get notified. You may even be able to place a back order if your order 2 or more. otherwise, numrich or the like parts dealers might have them or can backorder

Only way is a needle nose with crosshatch grip face to bite the head. Your screw is trash and your buttpad will be opened up a bit, but can be smoothed at the face for appearances.

I would be stunned if Taran makes a carrier for the m3. Again, little to no interest. This is coming from experience in the industry regarding “scaling.”

Thanks. That’s too easy though.

Just throwing my 2¢ in but I’ve never noticed any noticeable POI shift in thousands of rounds using a CC tube vs steel.

I called their CS directly and they stated that the M3 itself was never actually "confirmed". Our unit armorer is compiling an extensive group of detailed photos of the shell carriers from an M3, an M4, and a new TTI carrier to be submitted to TTI. There are subtle differences to the M3's carrier that most gunsmiths and mfg's aren't immediately aware of.

Yes, it will work. **Our Extended Carrier is specifically designed for 12 gauge M1/M2/M3/M4 Benelli Shotguns. Anything else will not be compatible without welding.**

Numrich has some: https://www.gunpartscorp.com/products/1440520

I tried unscrewing my butt pad and stripped the screws. Any advice getting it off?

Hello all, New here, but not from other forums you may frequent….. I am looking for a 24” Rib M2 barrel in non camp finishes. Looking for a mint or similar. I do have a mint Super N in 26” and a like new sight in only 24” M2 Rifled….

In all fairness, the pool of M3 owners who want to upgrade is slim. You probably are the only person to ever consider or make contact with taran. As for the M4, the usage does not dictate a carrier upgrade. Case of usages… Hence, Taran catering to the M2 which is still kicking tail to this very day.

Contacted them a little earlier today. At their request, we're getting the carriers of an M3, M4, and one of their AccuGuide Extended Carriers lined up together for some detailed photos. Surprised we (or anyone else that I'm aware off) haven't done this before as a reference. I'll share with the masses once all is photographed and submitted to TTI.

This is nothing new and unfortunately has been going on since the days of forums and chat rooms on MSN Games….. You did what is right and should be a model for those in similar situations. I subscribe to the saying, “Buy the Seller.” If you can’t get honest and diligent answers, you walk. Doesn’t matter how bad the deal will sting if you pass up.

Taran and Co are pretty good at answering questions. Give them a shout.

Anyone know if this TTI carrier will fit & function properly on an M3? THX!

resurrection...🧟‍♂️👻 Has it ever been determined and/or confirmed if the TTI Accuguide Extended Carrier will allow the M3 to function properly? I'd like to install a couple in my M3's rather than having to weld or close up the "thumb catcher" space on the factory carriers. If not the carrier from Taran Tactical, what other options are there for an enhanced/improved carrier specifically for M3's? THX, and sorry for digging up this old post.

Just a thought on a possible POI change with a Ti mag tube. The coefficient of thermal expansion of Ti alloy is 5.3 vs 7.0 ( 10-6 in/deg F). since the barrel is steel, there may be something going on with stress and barrel deflection in the vertical plane as the assembly heats up..... Would have to be very slight effect, indeed. And while we are on the subject of 7 rd mag tube weights... here is some info. Ti tube 5.3 oz. . One of my thin wall 4130 alloy steel tube 7.0 oz. For comparison, the factory 5rd with the dummy extension assembly weights 9.3oz Joe

Maybe Briley can thread your factory length M4 barrel for Benelli Mobil chokes?.... The chopped Nova barrel is likely too thin for those tubes unless the barrel is quite short (an OD of around .840” minimum required). On a related note my shop still is searching for a set of the 12ga Mobil choke installation tooling that is actually available for purchase (piloted reamer and tap in new or nearly new condition). Any leads that pay off would be greatly appreciated

MIne entry model is somewhere between a butt-ton and a crap-ton. She's heavy but she runs. I don't have a fancy scale to measure.