Ihrinwe

NYC is right, totally normal. Even with only being able to hit the middle/forward portion it drastically increases the area of functionality over the stock release.

Nice setup. Matchsaver is what you are thinking of. Multiple companies make them.

The movement seems pretty normal although the amount can vary a little bit between individual guns. I also have one of @RxArms six position recoil tubes which seemed to lessen my stocks play a bit from the oem if I remember correctly. I don't think the sound is anything to be worried about. Your stock seems to be locking in to place.

Agreed will have to add this to the list on deeper cleans. Thanks for sharing.

Set up an eBay search and save it so you get notifications for new listings for one. Might be the quickest way until they open the retail store.

I use these for cable management on a couple of guns. Cheap and never had any issues. I like how they are multidirectional. Montrum M-LOK Weapon Light Pressure Switch Cable Clips https://a.co/d/ecrpleO

Damn that looks great, wonder what pricing would look like.

Have one of his 6 position tubes installed on one of my M1014s. You will be happy with it @Icarus2.0.

As street said if you go the housing route the A&S is a good option. For forend if you want to keep a stock look but have it count towards 922r you could always do a US made replica. FFT makes one that’s good enough for this. https://freedomfightertactical.com/products/the-freedom-fighter-tactical-922-compliant-forend-for-the-benelli-m4-shotgun-black If you want something a little fancier there is Agency Arms or Briley. https://www.agencyarms.com/benelli-m4-compatible-mlok-handguard https://www.briley.com/p-63643-briley-3gun-m-lok-handguard-benelli-m4.aspx As long as you aren’t using an MLok slot that rubs/blocks the Argo system you are fine. I know some people also Dremel down the exterior of MLok cam to get clearance from the system if they want that specific spot.

Geissele hammers are unicorns now. The prices people are asking for used ones or that they add to a gun for having one is insane.

Took me a while to get mine off. As Rx said 500 is minimum for red thread locker and I used a standard two level heat gun. You may even see little wisp of smoke once it starts to breakdown and then it should twist off.

Been considering getting an M3 myself. Glad to hear you think it's underrated.

Agree that you can get a million pieces of advice for this question. I run a standard MS1, just personal choice but I will not ever run a one point sling on a shotgun so I didn't need a MS4. As right hand shooter I typically do front connection on left side of gun, rear is on the right side. For some reason on my M4 it was more comfortable to run both connection points for front and back on the left side. I have a 1301 as well so I didn't mind my M4 build being a little more on the heavy side so I think it's more a balance & LOP situation.

Super nice family, wishing the son a speedy recovery.

$8,000 is insane even for the pandemic prices we saw, that seller came up!

lol hate to tell you I got mine on Amazon for $4.48 when I did mine. FFT with another sale special, $25 is crazy.

Did you decide against the hood?

I like it, just have to remember only the tritium dot glows without a good light charge. I have a scout pro on my M4 so if I flash that on for even a second the glow paint is good to go and gets pretty bright for any amount of time I would need it in a real world defensive setting.

I have the green post installed on my M1014. I personally find front hoods distracting on other platforms so I stayed away from it. Please share pics once you have installed!

They are legit and good seller have bought several from them. Get them while they are low at one point they were listed for $400+.

Can confirm that it works, have it on my CC full length tube.

Installed one of these today. Feels sturdier than I expected and has decent room but still doesn’t add much weight. Fair warning if you have an IWC rear QD mount especially on the left side it’s a little bit tighter to open up the compartment and get inside but it is still do able. if it bothers you order one of @RxArms QD systems and it will eliminate the problem.

Not that there is ever a question with @RxArms products but received and installed this today. Good quality and screwed on with absolutely no problem.

Appreciate the feedback. Something about the Aridus seems too bulky to me idk why. I also don’t like it’s a taped on system and not fully secured.

I use this and never had any issues. It goes on sale from time to time. VANPO Digital Torque Screwdriver 2.66-53.1 in-lbs/0.3-6 Nm, Adjustable Screwdriver Torque Wrench Set with Buzzer/LED Indicator Notification for Bike Repairing, Tools, Maintenance and Mounting https://www.amazon.com/Screwdriver-2-66-53-1-Adjustable-Notification-Maintenance/dp/B09YTS1Y6C/ref=sr_1_4?crid=37D7WT3L5FY1O&keywords=digital+torque+screwdriver&qid=1688440624&sprefix=Digital+torque+%2Caps%2C161&sr=8-4