RabbitSlayer Posted January 14, 2009 Share Posted January 14, 2009 I own an ultra light and I can never get the choke to be in tight... They always loosen up on me... This holds true for the stock chokes and chokes I bought from other manufacturers Anyone else have this issue ? Quote Link to comment Share on other sites More sharing options...
MontefeltroPro Posted January 14, 2009 Share Posted January 14, 2009 Mine seem to loosen up too. I shoot a (new) Montefeltro Silver 20 gauge. I bought some new Briley extended and ported chokes and got a Briley wrench in the deal as well. I was able to put a little more torque on the choke with the Briley wrench. I shot two or so boxes through it dove hunting in the South Zone of Texas last week... still tight. Then the second day of hunting, it loosened. I don't know the answer, except maybe torque it down occasionally? Look at: Briley.com to see the wrench... I think it's pretty good. It gives you more leverage and works with the supplied chokes that come with the Benelli as well. Quote Link to comment Share on other sites More sharing options...
GTPSC Posted January 28, 2009 Share Posted January 28, 2009 Let me say something here on this. I am a small manufacturer of shotgun chokes (http://www.blackborechokes.com) and I have shot (and own a few) all types of shotguns with screw-in chokes. ANY manufacturers flush or screw-in choke will, sooner or later, shoot loose no matter how much you put the wrench to it! I always recommend using a good thread grease on the threads when installing the tubes. When you clean the gun, be sure to remove the lubricant as best you can as well. You might cultivate the habit of reaching up to the choke after a typical shooting interval and tighten them down by hand (of course, make sure the gun is not loaded and on Safe). If you really torque them in with the choke wrench, it will just be that much harder to get them out (and the possibility of damaging the internal threads of the barrel. GTPSC Quote Link to comment Share on other sites More sharing options...
GENELEO Posted January 28, 2009 Share Posted January 28, 2009 I thought that was what you have an index finger for, along with pulling the trigger. Quote Link to comment Share on other sites More sharing options...
fishinguy Posted January 28, 2009 Share Posted January 28, 2009 I haven't noticed this on mine, but I've had it for only a couple of months. I do have a habit of always checking the choke regularly on all of my shotguns, and doing mid-day tweaks in the field. But have never noticed a loose choke. Are you noticing this often? For example after only a few shots or at the end of a long weekend of hunting? Quote Link to comment Share on other sites More sharing options...
wornsoles Posted January 28, 2009 Share Posted January 28, 2009 I have used an SBEII for less than a year, but in that time, have fired more than 600 rounds. I carry a small, light choke tube wrench on my vest and periodically check for tightness. I have yet to encounter a loose choke. I also use Rig as a choke tube lube. Quote Link to comment Share on other sites More sharing options...
Mike Grasso Posted January 28, 2009 Share Posted January 28, 2009 (edited) The M4 choke has a tendency to back out a slight bit also, so it's part of the spin-up routine to tighten it down. Never owned a choked shotgun that didn't need it once in awhile. Mg GTPSC - I visited your sight and read up on your chokes and your thoughts on patterning, very well thought out, I'd like to try some for my 686! Edited January 29, 2009 by Mike Grasso Quote Link to comment Share on other sites More sharing options...
tucker301 Posted January 28, 2009 Share Posted January 28, 2009 I had a set of Primos Dead Zone chokes for my SBEII when I started this waterfowl season. I guess they're technically still mine, but some SCUBA gear and underwater metal detection may be in order. Quote Link to comment Share on other sites More sharing options...
GTPSC Posted January 29, 2009 Share Posted January 29, 2009 Mike, does your 686 have the Beretta Optima or Mobilechoke? If you are not sure, the "shank" (that portion that is in the barrel when the choke is fully screwed into the barrel) of the Optima is about 2-3/4" long while the Mobilechoke is about 2" long. Also, what constrictions are you interested in? The finishes available are either bright stainless or matt bead blast. GTPSC Quote Link to comment Share on other sites More sharing options...
Mike Grasso Posted January 29, 2009 Share Posted January 29, 2009 I'll PM you when I get back to L.A. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.