kmc0929 Posted June 12, 2010 Share Posted June 12, 2010 What keeps the pistol grip attached to the M4 stock? Is there a screw? The grip on mine is separating from the stock body. Quote Link to comment Share on other sites More sharing options...
cody6.0 Posted June 12, 2010 Share Posted June 12, 2010 I'm not quite sure what you're asking do you need to remove the rubber insert or the entire stock? Quote Link to comment Share on other sites More sharing options...
12508 Posted June 12, 2010 Share Posted June 12, 2010 It threads on and is kinda wedged in place by the triggerguard. Or are you talking about the pistol grip coming apart from the stock and not the whole assembly from the receiver? Post some pics. Quote Link to comment Share on other sites More sharing options...
kmc0929 Posted June 12, 2010 Author Share Posted June 12, 2010 the stock is on fine, the actual pistol grip is coming away from the stock. Quote Link to comment Share on other sites More sharing options...
KB Fab Posted June 12, 2010 Share Posted June 12, 2010 If it's the rubber portion of the grip you are referring to, I'm not sure how that is actually attached. The parts schematic isn't really clear but it looks like it just pops into place over the grip. Is your gun new or have you had it a while? I ask because if it's older, the grip rubber might just be losing it's shape/elasticity. Quote Link to comment Share on other sites More sharing options...
Super33 Posted June 12, 2010 Share Posted June 12, 2010 Get a collapsible stock, apparently NOW'S THE TIME. Prices are low. Quote Link to comment Share on other sites More sharing options...
needncash Posted June 12, 2010 Share Posted June 12, 2010 Or replace the rubber grip with a new Benelli grip for 18.99 from Brownells, if you get over $125.00 you can use code CP9 for $0.99 ground shipping. http://www.brownells.com/.aspx/pid=6387/Product/GRIP_INSERTS__RUBBER__SYNTHETIC Quote Link to comment Share on other sites More sharing options...
Jackalope33B Posted June 12, 2010 Share Posted June 12, 2010 What keeps the pistol grip attached to the M4 stock? Is there a screw? The grip on mine is separating from the stock body. KMC, there was a write up on the grip here in the forum. From what read, the grip just slips on and off. The member did mention that it was a bit*h to take off, but good luck with it. Quote Link to comment Share on other sites More sharing options...
cody6.0 Posted June 12, 2010 Share Posted June 12, 2010 kmc0929, if you need a grip I have a new one in an open brownwells bag that I'd part with for $12 shipped. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.