RxArms Posted November 24, 2021 Author Share Posted November 24, 2021 (edited) 6 hours ago, les_garten said: RX, can you post side by side pix of the handles along side each other and installed as well. Mine is installed pretty deep, but seems a perfect fit. To tell you the truth, I would probably go for a smaller diameter but the same depth. I like the one on the far right in my pic I posted above, but it's a little heavy. Nice job on these, yours is the one in my shotgun BTW. I will once I get the raw handles from machine shop. not sure what deep means, can you explain? As mentioned new handles will be 0.2” longer and a diameter a bit less. Might be what you are wanting. Edited November 24, 2021 by RxArms Quote Link to comment Share on other sites More sharing options...
les_garten Posted November 24, 2021 Share Posted November 24, 2021 34 minutes ago, RxArms said: I will once I get the raw handles from machine shop. not sure what deep means, can you explain? As mentioned new handles will be 0.2” longer and a diameter a bit less. Might be what you are wanting. By deep I meant, close to the receiver, the thing I guess you are trying to rectify with making it a bit longer. I have the stock bolt release button so it's perfect on my gun. To tell you the truth, I'd like the length of mine but the smaller diameter of your new one. Everyone has their own idea though for sure. I like the one I have as well, no complaints 1 Quote Link to comment Share on other sites More sharing options...
BK02 Posted November 25, 2021 Share Posted November 25, 2021 On 11/23/2021 at 8:30 PM, Ben elLes said: I have a second one now ? I think I will me making a few more charging handles during this thanksgiving break I have, if you need another one. I know you were one of the first ones to message me wanting another one. Quote Link to comment Share on other sites More sharing options...
RxArms Posted November 25, 2021 Author Share Posted November 25, 2021 ? Quote Link to comment Share on other sites More sharing options...
Milspec Posted November 25, 2021 Share Posted November 25, 2021 I'm down for one of these in black with the slimmer diameter. For me the closer to 1/2" the better. I know, everyone likes their own specific flavor. You can't make 8 of them. lol 1 Quote Link to comment Share on other sites More sharing options...
RxArms Posted December 9, 2021 Author Share Posted December 9, 2021 (edited) Got the raw handles in, now to send them off for cerekote. Edited December 9, 2021 by RxArms 1 Quote Link to comment Share on other sites More sharing options...
rubicon20032003 Posted December 9, 2021 Share Posted December 9, 2021 When they’ll going to be for salex Quote Link to comment Share on other sites More sharing options...
RxArms Posted December 9, 2021 Author Share Posted December 9, 2021 6 minutes ago, rubicon20032003 said: When they’ll going to be for salex When I get them back. I’ll email out to waiting list.. no pre order. 1 Quote Link to comment Share on other sites More sharing options...
rubicon20032003 Posted December 23, 2021 Share Posted December 23, 2021 On 12/9/2021 at 6:45 PM, RxArms said: When I get them back. I’ll email out to waiting list.. no pre order. Any eta for these new ones 2 Quote Link to comment Share on other sites More sharing options...
RxArms Posted January 13, 2022 Author Share Posted January 13, 2022 On 12/22/2021 at 5:44 PM, rubicon20032003 said: Any eta for these new ones They are getting cerekote right now…. Maybe 2-3 weeks. 3 Quote Link to comment Share on other sites More sharing options...
Milspec Posted January 22, 2022 Share Posted January 22, 2022 Any idea what the new OAL is in reference to a TTI charging handle? Quote Link to comment Share on other sites More sharing options...
rubicon20032003 Posted January 30, 2022 Share Posted January 30, 2022 On 9/3/2021 at 10:46 PM, RxArms said: Yes I have less of a taper for inserting into the bolt, trying to save as much weight as possible. Can easily be inserted if you rotate the handle at the same time as pushing. Pushing straight in without rotating is more difficult. as for the bonding/affixing method… a proprietary technique known only to ancient dwarven blacksmiths nice collection, I should point out only mine in that group matches slightly less weight than the OEM handle while giving benefits of hardened steel tang and ultra light and much bigger handle. Any updates new a new style for a build Quote Link to comment Share on other sites More sharing options...
StreetSweeper56 Posted January 31, 2022 Share Posted January 31, 2022 On 11/24/2021 at 10:01 PM, BK02 said: I think I will me making a few more charging handles during this thanksgiving break I have, if you need another one. I know you were one of the first ones to message me wanting another one. Sorry bk02, I just saw this; no, yours works fine! I'm the sort that likes to have spares, especially of parts that are removable and may fly off and get lost when I need them most; some call it paranoia. Quote Link to comment Share on other sites More sharing options...
RxArms Posted February 8, 2022 Author Share Posted February 8, 2022 On 1/22/2022 at 7:31 AM, Milspec said: Any idea what the new OAL is in reference to a TTI charging handle? I’ll measure them again once I get them back from Cerekote, they are done actually, should be available to sell within 2 weeks. 2 Quote Link to comment Share on other sites More sharing options...
Milspec Posted February 9, 2022 Share Posted February 9, 2022 On 2/8/2022 at 1:12 AM, RxArms said: I’ll measure them again once I get them back from Cerekote, they are done actually, should be available to sell within 2 weeks. I'm looking forward to placing my order. 1 Quote Link to comment Share on other sites More sharing options...
RxArms Posted February 24, 2022 Author Share Posted February 24, 2022 I have started to email out to the waiting list to purchase. I will give a few days for waiting list emails to purchase on a private link, after that I will open up purchases to all. 3 Quote Link to comment Share on other sites More sharing options...
Milspec Posted February 24, 2022 Share Posted February 24, 2022 Is there any paperwork that needs to be filed for this? Per your description in the US if it's under $100 we're good to go. However, with shipping the total appears to go over that mark. Or, does shipping not count in regards to required paper work? Quote Link to comment Share on other sites More sharing options...
rubicon20032003 Posted February 24, 2022 Share Posted February 24, 2022 Placed a order for two Quote Link to comment Share on other sites More sharing options...
rubicon20032003 Posted February 24, 2022 Share Posted February 24, 2022 1 minute ago, Milspec said: Is there any paperwork that needs to be filed for this? Per your description in the US if it's under $100 we're good to go. However, with shipping the total appears to go over that mark. Or, does shipping not count in regards to required paper work? If you say buy two .They need to list value under a $100 that’s all Quote Link to comment Share on other sites More sharing options...
Milspec Posted February 24, 2022 Share Posted February 24, 2022 Ahh you know what. It's the PP CAD conversion rate that's pushing it over the "limit". US to CAD is $1 to $1.27. PP only gives you $1.21 CAD due to their "conversion fees" Quote Link to comment Share on other sites More sharing options...
bcruze Posted February 24, 2022 Share Posted February 24, 2022 21 minutes ago, Milspec said: Is there any paperwork that needs to be filed for this? Per your description in the US if it's under $100 we're good to go. However, with shipping the total appears to go over that mark. Or, does shipping not count in regards to required paper work? It's not going to be a problem... Quote Link to comment Share on other sites More sharing options...
RxArms Posted February 24, 2022 Author Share Posted February 24, 2022 1 hour ago, Milspec said: Is there any paperwork that needs to be filed for this? Per your description in the US if it's under $100 we're good to go. However, with shipping the total appears to go over that mark. Or, does shipping not count in regards to required paper work? I will put value under $100 on customs Quote Link to comment Share on other sites More sharing options...
RxArms Posted February 24, 2022 Author Share Posted February 24, 2022 1 hour ago, Milspec said: Ahh you know what. It's the PP CAD conversion rate that's pushing it over the "limit". US to CAD is $1 to $1.27. PP only gives you $1.21 CAD due to their "conversion fees" Yes PayPal is a rip off I’m trying to find another way, but I’m a small time guy and PayPal provides shipping and e commerce in one package which makes things very streamlined for me. I’m sorry the conversion sucks. 2 Quote Link to comment Share on other sites More sharing options...
Milspec Posted February 24, 2022 Share Posted February 24, 2022 9 minutes ago, RxArms said: Yes PayPal is a rip off I’m trying to find another way, but I’m a small time guy and PayPal provides shipping and e commerce in one package which makes things very streamlined for me. I’m sorry the conversion sucks. I’m not worried about losing a few pennies on the dollar. I just didn’t know why the total ended up being a little more. Then I figured it out. Not a big deal. I was more concerned with the other scenario. It looks like a great handle! 1 Quote Link to comment Share on other sites More sharing options...
StreetSweeper56 Posted February 24, 2022 Share Posted February 24, 2022 I got mine, thanks Robb! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.