tucker301

Mine typically shot high. I discovered that European guns are set up for a slightly differently sight picture than are US made guns. As soon as I learned to sight the gun showing a bit of rib and putting the entire target above, not behind, the beads, I was on target. There is of course some adjustment in the shim kit. I think I read somewhere that the Benellis are designed for a man of 5'9" in height and of average (165 lbs.) build. If you're 6'4" or 5'3", you're more likely to have problems right out of the box. Personally, if I were going to set up a gun exclusively for turkeys, I'd mount a nice red dot on it. Other Common Issues: Loud Safety - Some novice gunners have a problem with the Benelli safety. Given your level of prior experience, you'll figure out pretty quickly that using a little reverse pressure from the opposite side will let it slip off with a whisper. The Benelli Click - The term commonly refers to the sound a Benelli makes when you were expecting it to go BOOM. The Inertia bolt does not positively lock up when in full battery. It can be subject to Murphy's law if the hunter is not consciously aware of the matter and does not take proactive measures to guard against it. You'll soon learn to make a quick visual check to make sure the bolt is fully rotated into battery before getting too close to shooting time. A slight bump on the heel or trying to ease the bolt closed quietly will almost always result in Murphy ruining a good thing. Stovepiping, Jams, FTF's - The inertia system relies completely on recoil to cycle the weapon. A loosely held or improperly shouldered gun can result in a failure to properly cycle. Light (girly) trap loads can also not produce enough recoil to cycle the gun. I doubt you'll be shooting trap loads at turkeys, but stranger things have happened. Rust, Chipping, Fading -The black finished guns will rust if not properly cared for. A good CLP like Hoppes or Breakfree will keep it in excellent shape for a long time. Ignore it, put it up wet, case it cold and leave it, and you'll see rust. It's steel, after all. The camo finishes will chip under what I consider normal use. If you want the gun to stay new, leave it at home. It's a tool, not jewelery. DEET-based insect repellents will cause the camo films to fade. Be careful when using them. Extra Barrels, Accessories, and Parts - The gun and the parst are made in Europe. While the website boasts all kinds of goodies for your new SBEII, the reality is that many are darned hard to find, and they're pricey. Service Turnaround - While it's never been a problem for me, some people put all their stock into one gun. When the rare problem occurs that does require a factory return, turnaround times can be devastatingly long. This is especially true in the Fall through duck season. Don't get caught without a backup plan (that old 870). I'm sure some of the other regulars can add more, but these are my thoughts off the cuff.

http://www.cheaperthandirt.com/86356-4622-1146.html That's what I use.

What competitor? Benelli doesn't make an O/U.

See what happens when you encourage this kind of behavior, old man? And no, you cannot have your name engraved on the receiver. We've already been over that on the concept gun.

Stevens is a division of Savage Arms Co., not Benelli USA

The gun ships with a limiter plug, choke tubes, owner's manual, parts manual, warranty papers, and a little bottle of oil.

Stop typing and start reading.

These forums are for Benelli fans, customers, and the occasional trolls and cellular phone Spammers. If you have a question for Benelli, call them and ask them.

My best guess: birddog had a laptop with a saved login. Some crackhead has stolen his laptop and is posing as him. Not doing a very good job of it though. We all know birddog is smarter than this... and he can spell.

The o-ring is supposed to fit tightly, but it should be soft and pliable. It compresses against the flat side and that's what holds it in place. Two options: 1. Call Benelli CS and explain your concerns. They may send you a spare o-ring. 2. Take the o-ring to the local hardware and get an extra or two. I'd stick with the same size.

Stick with it. I've seen them strutting around here in early June. It only takes one good day to wipe away all that frustration.

It's going to make some noise. I usually hoot or wait for a crow to caw to cover the noise when turkey hunting if really close to the bird. It doesn't need to be pulled back all the way and let go. Mine will fully rotate if released from about 1/2" back.

I always do this after I have the bolt out of the receiver. It pops right out. Mudhen has shared his shoestring tip more than once as well. Wrap a shoelace around the handle several times and give it a yank.

The bolt of an Inertia gun does not lock into place as do some more traditional bolts. If you attempt to ease the bolt shut quietly, it will not fully go into battery and the weapon will not fire, because the bolt face is not tight against the base of the shell. It will also slip out of battery if you accidentally bump it just so on the buttstock; as in sitting it down beside a tree to stop and call. There's a pretty common tendency among bored and anxious hunters to slip the bolt opened to make sure they remembered to load a live round into the chamber. Trying to ease it back shut quietly won't allow it to fully rotate and close. FTF (Fail To Fire) will be the result. Keeping the bolt issue in mind the field, you will learn to be able to look at the bolt's position and tell if it's fully into battery. You'll get into a habit of checking it on a regular basis.

I'm gonna guess it's an Veloce Fucile Insapore

West Virginia.... Yeeeehaw! my guess

Benelli specifies a minimum load for their 12 ga, Inertia driven shotguns. The 3 drams represents an older method of measuring a powder charge. The full phrase is 3 drams equivalent, which means the powder charge produces the same amount of energy as 3 drams of black powder. These days, shotshell manufacturers are not labeling their products with powder charge, but instead are labeling them with muzzle velocities. A 3 dram 1-1/8 ounce load is a standard to heavy field load. Light field loads and target loads generally fall below this mark, and therefor may not produce enough energy to properly cycle the weapon. The inertia is generated from the same forces that produce recoil. Shooting lighter loads may be easier on the shoulder, but they're right on the edge of being potent enough to make the gun work properly. If you prefer to shoot light (I call them girly) loads, you may want to consider a gas-operated gun that can be tweaked to function with them.

Ciro Treated Barrel Stainless Recoil System ComforTech and AirGrip Stock Larger Trigger Guard Opening I think the rib may be higher & maybe wider?, but I'm not sure about that one. You should break the gun in with heavy field loads, a box or so at least. After that, it should cycle 3 dram 1-1/8 ounce loads with no problems.

A Winner!

I know, but it would be cheating for me to participate. She's a beauty!

Buddy and I swapped SBE and SBEII one day while duck hunting. I'd say that the Comfortech is mostly marketing. At best, a SLIGHT reduction in felt recoil.

It takes a good bit of character to admit a misfire like that. There are several good men on these forums who have admitted to same. Heck, I know one guy who has it saved, so all he has to do is copy and paste. If I ever do make a mistake, you can bet that I'll own up to it too

Just curious. Did lay 3 3" 12 ga. shells end-to-end and measure them before buying the extension? You have to know that the extension is going to be at least that long, PLUS enough space to compress the spring. Just roughly estimate, that's going to be about 12" in length. How long would a plus 3 extension need to be to come out flush with the end of the barrel?

Those first two are GREAT pictures, Matthew. There's something about the second two that makes them a little less appealing Great job! There are many who look upon your turkey and duck pics and wonder if the man works and assume he must be filthy rich. You've explained it before. It boils down to a passion for hunting and a determination to make it happen. For that, I salute you!

Easy there, Kojak. At least you've got that giant mosquito you shot last Fall. Did you ever eat that thing? Was it better than carp?