HOGWILD

same acent as animule in d window, i thin

Just thought some might not be able to tell it has been updated

HUMP to top

you will get faster service calling!

http://www.gunnersden.com/index.htm.gun-dealers-westvirginia.html just be careful cause once a mistake is made it's possible it could be terminal? this is just a list and i suggest going with one that you have checked out to be reputable! GL! http://www.gunsmiths.com/index.php new link?

Manual does not mention it is ok to do it so could be something to this thought? Maybe Jonny36 could chime in Benelli CS will answer your questions but i feel they will tell you NO do not do it?

http://www.benelliusa.com/firearms/partsaccessories.tpl Call CS they can tell you where to order it from!

not in 04 catalog so had to be in 05 or 06?

http://www.shotguncombogauge.com/multiboregauge.html for 300.00 you can even find out, sure no one else cares.

Any Benelli Authorized Dealer will have this info along with prices or call Benelli and ask them where a Dealer is that has them.

http://www.benelliusa.com/customer-service/pdfs/2008_benelli.pdf benelli dealer says easy to install and 90 buck for their sights and safety swap should not cost a whole lot, sounds like you are doing the best thing with the plan ya got.

i guess i hate unscrewing things, QD is way to go for me and seems they rub stuff less?

i am aware of where it is but kinda perplexed on where it would be touching barell? not a lotta difference in any of them but is it the round post the sling attaches to or is it the cap itself thats touching somewhere? http://www.benelliusa.com/firearms/m2.tpl can you see what you are speaking about here?

ya gotta use a swivel that does not hit the barell, just take sling back or get one that fits without rubbing? group of slings that do not hit barell, uncle mike makes one and decent price, the swivels are smaller. http://www.unclemikesle.com/products/slings_swivels/tactical/slings_shotgun_sling.html

These have swivels but i prefer uncle mikes swivels and easy to find even walmart sells them but the swivels that come with these 2 slings are not gun friendly like the uncle mikes! just measure the width of the sling and get you some decent swivels and chunk the ones that come on these slings! and use these http://www.uncle-mikes.com/products/qd_super_swivel.html http://www.basspro.com/webapp/wcs/stores/servlet/Product_10151_-1_10001_19783_400004009_400000000_400004000_400-4-9 or if you have a cammo one allready just get your width and purchase the correct ones!

these guys will crio dip a tank but choke tubes are a bit cheaper! are they better ? sure they are? http://www.300below.com/site/barrel_stress.html they will send you a list of prices just email them and you can get all your guns dipped at same time! Big help, probably not but Benelli explains all this in their Innovations ad, so why a Poll?

http://www.franchiusa.com/catalog-request/pdfs/2008_franchiusa.pdf http://www.benelliusa.com/customer-service/pdfs/2008_benelli.pdf 1-301-283-6981? they will answer the phone, they normally do it after shot show and am sure it's in progress!

http://www.rhinochokes.com/main.htm maybe they could be found here, and i have realestate ocean front lot in NM:p

the swivels on a sling should not be that big as to where they would hit the barell, and yes anything that hits the barell would eventually mar the finish. the cap should screw on hand tight and the end piece sticking out should rotate and be semi loose but not anywhere near touching barell! is it the swivels hitting the barell and what type sling/swivels are they?

roll your own! http://www.rfgc.org/reload/pattern_density_calc.htm not good for hybrid shot i do not think but you did not mention what kinda shot

Call Trulock see if they have one that would be cheaper? They are the manufacturer for OEM Benelli chokes 1-800-293-9402, would be only option vs buying one from authorized Benelli dealer? Doubt there will be a lotta difference in price?

I ordered mine straight from Primos no issues! had it in no time and could have found it a few dollars cheaper probably else where but did not feel like looking and spending money trying to find one cheaper? plus they sent a catalog worth 2 dollars but better than website?

Trulock would be the guys ya need to ask this question to i guess since Optima is their designation, not sure if it would cause issues but if ya wanted to run the 6913 i would call them and since they manufacture benelli OEM chokes they should know if the thread application would be an issue if anyone would? Myself would stick with the 6912 if i had the SBEII or M2 per benelli choke chart and primos website. Why do ya wanta use a Extrema I or II tube in a SBEII or M2? http://www.trulockchokes.com/interchange.htm it talks about the difference between the 2 here but does not say what ya wanta hear it just says bore different size like mudhen said! Trulock # 1-800-293-9402 free call but they will probably help if they can?

http://www.nrapublications.org/tah/Slugs.asp nice article and explains why shooting rifled slugs thru smooth bore is not any help! i new that their was a reason for not mixing the 2 and thanks for digging this up! tucker:D

we used to use coons to clean our boats when we would come in from running our strings of YoYo's and trot lines when i lived in Arkansas and those little fellas would not even care if you were there or not they would go thru your boat if they thought the could get their hands on a live minnow! here in NM at a camp site they will ruin your food unless it is in a box and locked up! i remember what they would do to field of corn that was ready to harvest, looked like a heard of elk went in and bedded down after they got thru with it!! Amazed me how a few of those guys could tear a corn field UP!