HDRDKG

Sounds like the first M4's that came out in the limited edition. The stocks were fixed due to the gun ban that was still going on.

Its for a small 38 spl J frame model 60. Safariland hasn't made these holsters for sometime now and figured maybe someone has one lying around and needed a few bucks for it. Thank you.

Does anyone have a Safariland Klipspringer holster for a S&W 2" J frame?

No it's not. The M4 stock screws on to the receiver and the M3 doesn't.

Try [email protected]. I just checked and he said around 135.00.

I would not go 12". I have a factory 14" barrel and it is just perfect. I can put 5 in the tube, 1 floater and 1 chambered. Thats makes 7 rounds on a shotgun that is only 30" long with the stock in.

I think the short barreled Benelli's look awsome and are very tacticalcoolness. As far as accuracy goes, you aren't going to notice a thing if you use good ammo. At least that was the case on my M1 entry gun.

http://www.ccfa.com/HKPISTOLS.htm

You are right on the 14" barrels. They are cut here in the US to 14", but the front sight and barrel locking collar are in the correct area prior to being shipped to the US. All Benelli does is cut the barrel and refinish it.

I found them. http://www.shotgun.co.il/shotgun/am_benelli_files/am_benelli_view_open.jpg http://www.shotgun.co.il/shotgun/am_benelli_files/am_benelli_view_closed.jpg http://www.shotgun.co.il/shotgun/am_benelli_files/am_benelli_parts.jpg

Not sure on the recoil, as I haven't fired the 14" yet. I do know that my 14" M1-S90 was about the same recoil, but it was alot louder and the flame was like 2 feet long. I will try and find the web site on the 12" M4 and post it.

Just form 1 it and you dont have to worry about it.

That does not sound good at all. If you call Benelli CS, they will fix it, but you will probably have to send in the receiver.

Talk about gouging.

I bought an actual gun that was a factory short barrel. I am taking the barrel and putting it on my registered receiver, then cancelling the class 3 on the other gun, so I can take possession of it. I wanted 2 Benelli's anyway. As far as I know, a barrel by itself still aren't available.

1. Remove the trigger housing. 2. Unscrew the stock counter clockwise. 3. Screw the pistol grip on. 4. Put the collapsable part of the stock on the tube by pushing in the button and turning it. 5. Put the trigger housing back in the lower receiver. That is all there is to it.

I am selling the stock 18.5" barrel on Ebay and I have a 14" barrel on the way. And yes I have an approved BATFE Form 1.

I am the one selling the Benelli M4 barrel on Ebay. It is factory and never fired. Also the 12" Benelli M4 has already been done. there is a special OP unit in the Isreali Military that has made and uses them.

They are out there. Check with a Benelli law enforcement dealer. I just sold my 14" barrel and it was new never fired. Now I have put a legal length barrel on my M1 and it's being removed from the NFA registery, so I can sell it. Pain trying to sell these class3 items.

The limited editions and all military M4's have the fixed barrels with no screw in chokes. All the M4's with the model number 11707 have the chokes, or at least they are supposed to come with three of them. Mine just had the one choke in the barrel and Benelli CS had to send me the other two. Hope that answers your question.

If you find someone who will do a good cut job, then it will need to filed under a ATF form 1 along with your 200.00 tax stamp fee. You will be considered the builder of it. I did the same thing a few months back, but still can't find a barrel or anyone I trust to cut mine and do a perfect job.

PM sent. Thanks

Contact [email protected] He sells them for 160.00

Go tell him to pound sand. All guns are fired from the factory, I know my Benelli M4 was.

Anyone have a source for the 14" barrels yet.