L84Cabo Posted June 7, 2010 Share Posted June 7, 2010 Hi Folks I did a search and found a little feedback but was hoping for a bit more. Good and bad comments appreciated. And can anyone compare the overall quality to the GG&G one? Also, I believe Kip was working on a Ti handle. Anyone have any info on that? Is it still in the works or did he give up on it? Peace http://www.freedomfightertactical.com/ Quote Link to comment Share on other sites More sharing options...
Unobtanium Posted June 7, 2010 Share Posted June 7, 2010 Sell you mine for $35 shipped CONUS. Quote Link to comment Share on other sites More sharing options...
SGTMAJ Posted June 7, 2010 Share Posted June 7, 2010 had the GGG it flew off firtst time I fired it and again afte 24 rounds. The fredom fighter has been on now for 250 rounds without a problem. Quote Link to comment Share on other sites More sharing options...
taylaboy Posted June 7, 2010 Share Posted June 7, 2010 Plus One on the Sgtmajor. I had the GG&G because there were no other options. I put FF's on it and its great. Lighter, stronger quality. Highly reccomend it over any other options right now. Quote Link to comment Share on other sites More sharing options...
L84Cabo Posted June 8, 2010 Author Share Posted June 8, 2010 Thanks for the feedback! And Unobtanium, thanks for the offer but I think I'll go "new". Peace Quote Link to comment Share on other sites More sharing options...
Unobtanium Posted June 8, 2010 Share Posted June 8, 2010 (edited) Thanks for the feedback! And Unobtanium, thanks for the offer but I think I'll go "new". Peace My offer still stands for anyone else who wishes to try it. Got about 80 rounds on it. Edited June 8, 2010 by Unobtanium Quote Link to comment Share on other sites More sharing options...
03mach1speed Posted June 9, 2010 Share Posted June 9, 2010 I'm new so I can't pm, which handle do you have for sale Unobtanium? Will it fit an M2? Thanks:) Quote Link to comment Share on other sites More sharing options...
mikegli Posted June 9, 2010 Share Posted June 9, 2010 Sell you mine for $35 shipped CONUS. If you dont mind me asking, which charging handle are you using now? Quote Link to comment Share on other sites More sharing options...
1811 Posted June 9, 2010 Share Posted June 9, 2010 Sell you mine for $35 shipped CONUS. Sent you a PM... Quote Link to comment Share on other sites More sharing options...
Jackalope33B Posted June 14, 2010 Share Posted June 14, 2010 My offer still stands for anyone else who wishes to try it. Got about 80 rounds on it. Unobtanium, Which handle do you have that you are selling? Quote Link to comment Share on other sites More sharing options...
Unobtanium Posted June 14, 2010 Share Posted June 14, 2010 Unobtanium, Which handle do you have that you are selling? I am going to be using the OEM handle until Kip's hits the market sometime in the future. Quote Link to comment Share on other sites More sharing options...
Ozarkbadger Posted June 14, 2010 Share Posted June 14, 2010 sorry for an uneducated question. Who is Kip? From what I gathered from other posts, he is an inventor/entrepenuer/gunsmith on a small scale, labor of love style. Is there a full name, website or other contact info? Also, on Enos forum I often hear of Benny Hill mentioned as a go-to Benelli guy, where is he? Quote Link to comment Share on other sites More sharing options...
taylaboy Posted June 14, 2010 Share Posted June 14, 2010 Here you go buddy: http://www.carriercomp.com/ Quote Link to comment Share on other sites More sharing options...
TacticalKoala Posted July 3, 2010 Share Posted July 3, 2010 Quote Link to comment Share on other sites More sharing options...
Unobtanium Posted July 3, 2010 Share Posted July 3, 2010 (edited) sorry for an uneducated question. Who is Kip? From what I gathered from other posts, he is an inventor/entrepenuer/gunsmith on a small scale, labor of love style. Is there a full name, website or other contact info? Also, on Enos forum I often hear of Benny Hill mentioned as a go-to Benelli guy, where is he? Correct as far as we are concerned. However, he also works for the DoD, as evidenced by the expendature on equipment vs. products WE see, etc. (A perfect example is the multi-thousand dollar heat-treating machine he bought for the A2 tang on the bolt-handles. Yeah. I don't think bolt-handles sold in the amount of MAYBE a few hundred is entirely all of what inspired that, lol) For 3-gun, Mr. Hill is the man. Edited July 3, 2010 by Unobtanium Quote Link to comment Share on other sites More sharing options...
Maelek Posted July 4, 2010 Share Posted July 4, 2010 Did Unobtanium ever say what he was selling and what he was using? Quote Link to comment Share on other sites More sharing options...
Fastlane Posted July 4, 2010 Share Posted July 4, 2010 Did Unobtanium ever say what he was selling and what he was using? He said: Originally Posted by Jackalope33B Unobtanium, Which handle do you have that you are selling? "I am going to be using the OEM handle until Kip's hits the market sometime in the future." Quote Link to comment Share on other sites More sharing options...
Unobtanium Posted July 4, 2010 Share Posted July 4, 2010 Selling FFT Ti handle. Currently using OEM handle. Will buy Kip's in the future. Still for sale, and I don't remember or care what I listed it as before. It is $35 shipped CONUS USPS Priority, payed via USPS MO shipped to me USPS Priority. Quote Link to comment Share on other sites More sharing options...
03mach1speed Posted July 15, 2010 Share Posted July 15, 2010 Selling FFT Ti handle. Currently using OEM handle. Will buy Kip's in the future. Still for sale, and I don't remember or care what I listed it as before. It is $35 shipped CONUS USPS Priority, payed via USPS MO shipped to me USPS Priority. If it's still available and if it will fit an M2, I'll take it Unobtanium...... Just email me, thanks....... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.