Jackalope Posted August 31, 2012 Posted August 31, 2012 DMW Speedbar or GG&G Tactical Bolt Pad ? Pros and cons of each please only if you have experience with them. I know the prices so no need to comment on that. Thanks guys! Quote
truckcop Posted September 1, 2012 Posted September 1, 2012 Have used both (and others). DMW: It's cheap. Easy to install. I didn't like it. Its operation wasn't positive enough, at least for me. It's held in place by the back of the forearm. Didn't like that. GGG: Expensive. Somewhat harder to install. I like it. Most of my B's have them now. Positive operation. Large pad, easy to manipulate. The button/pad interface is machined so it's not going to easily come undone. There are others. I have one similar to the GGG but about half the price. Less substantial button/pad interface but no problems as yet. (TAC2, if you're interested.) Nordic, haven't tried yet but would like to. Quote
Creeper Posted September 1, 2012 Posted September 1, 2012 (edited) I have the DMW speedbar. I find it to work just fine and like the idea that it's neither permanent or requires modification to the gun... but, I'm left handed and hit the bar with my thumb, so perhaps my comments are of somewhat limited value. Just found out about a new bolt release button on the market, might be old news to some, but... Taran Tactical Innovations. C Edited September 1, 2012 by Creeper Quote
ROCKETW19 Posted September 1, 2012 Posted September 1, 2012 have you seen the one Uno made? I like it best outta everything so far and I will prob copy him when I do it. maybe he will come along and post pictures. its nice not crazy big like the rest and it looks like it belongs there. Quote
Unobtanium Posted September 1, 2012 Posted September 1, 2012 Alright Uno, how much? It ran me about $85 or so after shipping. However, that button is Cerakoated with the same stuff as the mag-tube. That came as a personal favor + shipping. Quote
Jackalope Posted September 1, 2012 Author Posted September 1, 2012 So how much larger than the stock release is it and how do I get one? Quote
ROCKETW19 Posted September 2, 2012 Posted September 2, 2012 So how much larger than the stock release is it and how do I get one? thats the bad part you gotta make it. I have the skills of a monkey so I didnt do it but i can lift heavy things. I never had a problem finding the stock botton so I didnt worrie to much or i would of went to gun smith. then again I only shoot paper targets with mine Quote
Zeke Posted September 2, 2012 Posted September 2, 2012 Have used both (and others). DMW: It's cheap. Easy to install. I didn't like it. Its operation wasn't positive enough, at least for me. It's held in place by the back of the forearm. Didn't like that. GGG: Expensive. Somewhat harder to install. I like it. Most of my B's have them now. Positive operation. Large pad, easy to manipulate. The button/pad interface is machined so it's not going to easily come undone. There are others. I have one similar to the GGG but about half the price. Less substantial button/pad interface but no problems as yet. (TAC2, if you're interested.) Nordic, haven't tried yet but would like to. You say it's easy to install? I want this, but I dont know how to install one. Can you elaborate on this? Quote
Unobtanium Posted September 2, 2012 Posted September 2, 2012 It measures 0.438" diameter with my calipers. OEM measured 0.238". Here are the components: http://shop.tac2.com/product.sc?productId=1&categoryId=2 http://www.shootersconnectionstore.com/Shooters-Connection-Mag-Release-Button-P536.aspx Quote
Creeper Posted September 2, 2012 Posted September 2, 2012 You say it's easy to install? I want this, but I dont know how to install one. Can you elaborate on this? You simply loosen the mag tube nut, slide the forend forward a bit, slip the Speedbar onto the receiver, slide the forend back and tighten down the mag tube nut. No modifications at all, although some have trimmed a little notch into the forend plastic to make the fit and operation a little smoother. [ATTACH=CONFIG]1604[/ATTACH] Advantages: No screws to break or loosen, no wobbly or missing buttons due to broken or loose screws. Gun can be returned to original condition, with the exception of a few wear marks on the receiver and any material you felt you needed to remove from the forend, in the time it takes to write this. It works. Cheers, C Quote
Sukhoi_fan Posted September 10, 2012 Posted September 10, 2012 It ran me about $85 or so after shipping. However, that button is Cerakoated with the same stuff as the mag-tube. That came as a personal favor + shipping. How did you attach that button Uno? Quote
Unobtanium Posted September 10, 2012 Posted September 10, 2012 How did you attach that button Uno? It threads into the drilled/tapped bolt-release sold by Tac-2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.