What’s recommended for choke tube lube ?

[Gmcrigger2007]

I ‘m running out of choke tube lube , is automotive never seize good to use on shotgun chokes ? 

[Sukhoi_fan]

I never buy choke tube lube, there's always an auto parts store nearby carrying Permatex Anti-Seize lube. In a pinch I'm thinking a very thin coat of RectorSeal #5 which can be found in plumbing supplies would suffice just fine.

[Evolution]

Iv'e never worried too much about it....I just grab what ever is close at hand at the bench, be it some rifle grease, bearing grease or that silver NAPA auto parts anti seize it all works fine for the job.😊

[M2_shootr]

I use nickel anti seize compound…..have been using the same container for many years. A little goes a very long way

[Gmcrigger2007]

Thanks for all the replies. I ended up getting a tube of this stuff. 

[FDHog]

I just use what I use on my pistols and rifles. TW25B. Little goes a long way.

[bambihunter]

On my safe queens, I put a little gun oil behind the choke just as added anti-rust protection. Guns that get shot, I have never before used choke lube in my 45+ years of shooting. If I were to, I'd use a dry lube like I use for the action and magazine.

[Sukhoi_fan]

JMO, but I would advise against using any light oil on the choke threads. A grease of some type will act as a gas check to prevent gas fouling of the threads whereas a light oil will contribute to the fouling over time (for those of us who don't remove the choke and clean it after each use).