Jump to content

M4 Capacity?


Hawk
 Share

Recommended Posts

4+1 Strange:confused:

I have 7+1 or 6+1 capacity, difference only 'cause of cartridge length...

 

That is from the factory without the extension tubes. I have seen your pictures (very nice:)) and you have the extension tubes, so this would not apply to you.

 

I think the original poster is just curious as to what the original capacity is coming from the factory without an extension tube.

Link to comment
Share on other sites

I think the original poster is just curious as to what the original capacity is coming from the factory without an extension tube.

 

7

 

A factory 11707 will hold seven total 2 3/4" rounds. Five in the limited cap magazine, one in the chamber and one on the carrier.

Link to comment
Share on other sites

7

 

A factory 11707 will hold seven total 2 3/4" rounds. Five in the limited cap magazine, one in the chamber and one on the carrier.

 

Exactly what I said. 5+1. I have never seen Benelli list a round on the carrier. Again, the original poster was curious what the FACTORY listed capacity as.

Link to comment
Share on other sites

Capacity w/ Standard Magazine

2.75" Shells

Magazine:
5

Shell Carrier:
1

Chamber:
1

TOTAL:
5+1+1=7

 

3.00" Shells

Magazine:
4

Shell Carrier:
1

Chamber:
1

TOTAL:
4+1+1=6

 

 

Capacity w/ Full Length Magazine

2.75" Shells

Magazine:
7

Shell Carrier:
1

Chamber:
1

TOTAL:
7+1+1=9

 

3.00" Shells

Magazine:
6

Shell Carrier:
1

Chamber:
1

TOTAL:
6+1+1=8

Link to comment
Share on other sites

  • 5 months later...
  • 5 months later...

Since noone else replied to our question Ill answer. I figured it out while out shooting my M4.

You load the tube to max capacity. Then pull the bolt/carrier back far enough to add another round on top of the ramp, or shell carrier. After adding that round, hold the same round so as to clear the bolt/carrier as you move the B/C forward just slightly. Then add another round directly into the chamber. If you have the factory Five round tube you now have 7 shots at the ready. Five in the tube, One on the shell carrier/ramp and One in the tube. If you have the Seven round tube then you have a total of Nine shots at the ready.

Make sense?

Link to comment
Share on other sites

Since noone else replied to our question Ill answer. I figured it out while out shooting my M4.

You load the tube to max capacity. Then pull the bolt/carrier back far enough to add another round on top of the ramp, or shell carrier. After adding that round, hold the same round so as to clear the bolt/carrier as you move the B/C forward just slightly. Then add another round directly into the chamber. If you have the factory Five round tube you now have 7 shots at the ready. Five in the tube, One on the shell carrier/ramp and One in the tube. If you have the Seven round tube then you have a total of Nine shots at the ready.

Make sense?

 

Got it, thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...