HOGWILD

Get your Supply Sgt. to get the NSN from website and order yall a B Load!! Thank's for serving!!

you are the one that had the ability to drop him!! i think the Benelli had an equal part as did the Hornaday Slug, congrats!!

http://www.shotgunworld.com/guncare.html go to bottom of page in center"Basic Shotgun Cleaning" this is a generic cleaning process and open owners manual and use it and i know it does not go into detail on cleaning but still use for reference on assy!make sure to use lint free cotton rags and find a place ya do not care about getting dirty to do it! were did the cosmoline come from? try here also http://www.vaapensport.com/ebennova.html try this link by going to benelli home page and find the "Links" tab and click on it and go to Italian section and click on english mode and check out their manuals goes into detail on stripping gun down and just remove dirt and crud with appropriate cleaner and make sure ya do not use caustic cleanears on exterior finish! I would use Hoppes #9 and fixxin to purchase some lube called MILITEC-1 since benelli lube is hard to find and just do not over lube and get brushes into all the tight spaces and repeat till its clean and just lightly oil interior metal surfaces!

http://www.allaboutshotguns.com, right hand side of page under Heading "ARTICLES" you will se a Reference Guide for CHOKEs hope this helps! Mobile chokes went out of manufacture 3 or 4 years ago and are mainly used on Berettas but can be used on OLDER Benellis and this chart should clear that question! also on benellis home page go to shotgun accesories and find oem choke page and at bottom of page it list which oem chokes you can use! probablycame with a cylinder choke as per the 04 catalog! C/S will answer most question in a timely manor over telephone EST!!

do not think so but according to benelli website under parts and accessories they have them fo SBE/M1 with synthetic stocks? nova has them also!

so did ya loose your right hand in the deal? swithable/reverable i bet it could be done and do not let LT's smith work on it!!

Some people have nothing good to say about anything? LMAO Why would the factory tubes not be any good, i feel that they would suffice for most applications and people just want something NEW $ EXPENSIVE BUTT whats to say that aftermarket manufacturers have not done their home work and i expect the differences to marginal at best!! But i am an native arkanite and what would i know!!

You bet 3 1/2' Hevi-shot or winchester ER and graber with one hand, will build those muscle real quick, seems after 2 years you would be strong by now? try some waterfowl hevi-shot one handed now that will get ya strong real quick!!

Good clip and i think the first shot was a hit? Whitetail do not jump that high for no reason!! I also do not think he is that bad a shot cause i have seen some footage elsewhere when they were riding arould in one of those swamp rigs with that crazy motor config mud buddy? and it should be against the law to have that much fun!! and probably is in LA or AR check out http://www.gator-tail.com they are doing some wild things on some of their sample videos!!

Seems Duck Commander has for real put the Brownings down and is a full fledged Benelli carrying DUCKAHOLIC!! This guy and his family live about 80 miles from my home and i know what kinda ducks they can get into and they live and breath ducks!! check them out at http://www.duckcommander.com pretty good site some sample video clips that are great viewing and lotta stuff/forums/junk!!

Old operator error !! ya know what they say stuff happens just too bad it got you!! Why would you not live with a gun that you do not shoulder properly?

Thanks for service!! Seems you guys should have all the inside scoop on spare parts!! When i was in my supply Sgt was the person to know!! Just spend about 10 minutes looking here and you will find most of what ya need, me not owning one i really do not keep up with parts for them but seems they have went up in price since Benelli quit selling them and if ya have LEO capability you should be able to get whatever ya need probably! Welcome HOME!! I served in Shield/Storm and it's nice to come home !!

Search funtcion works well and groups of info but it's spread out cause everyone wants a new thread on the same subject, why i guess they are confused on where search button is or how it's used? but aftermarket parts there are a group talked about all over this site! Just dig a little and troll a little and you will be on your way to M4 Heaven with all the bells and whistles good luck!!TB just do not tell me you are in sandland and they aren't giiving yall what yall need to do your job cause that would make me ILL!!

seems all ya need to do is install a thin piece of rubber matt between mag tube and barrell and see if ya could not just tighten it down with some german torque. That or call a smith and ask the same question? call benelli C/S? ya might give one of these guys a holler or insight technoligies inc they make the benelli light assy for benelli! http://www.smartgunner.com http://www.action-lights.com http://www.skdtactical.com

wikipedia has some good articles on how chokes work and a lotta the manufacturers really go into detail about their brand cause they want your $$$. I just purchased an Primos Jellyhead .660 and should be her in 5 to 7 days and plan on using winchester E/R's in it and i think benelli has a little video on their site about choke tubes which is good C/R material but ya gotta talk to whomever ya will be shooting with if ya will be shooting with someone the can give invaluable input and Briley Manufacturing, Rhino Cases and Primos will all gladly answer your questions with a group better knowledge than MOST, chokes are not that hard to figure out ya just need to google them and dig,dig for info!! Check out Shotgunworld.com they have some good info on some of their pages!! Good luck and fit your gun to your body then patterrn once ya get the choke and load ya going to use or thinking of using!! i am sur mudhen would be a great person to search his post on the subject he has considerable experience in the choke info process!! Later TB

If ya can't find it under post from SOCOMguy on this page you probably are not looking but there are a couple ways i have read about and the heat gun and ovenmit would be the one i would use, the insert in oven method really does not work for me! would also use sparingly a low temp loctite to install new one but some people say they do not use it?

Seems to me that during the upcoming elections we need to do our HOMEWORK on all the ANTI-GUN Politicians, by just doing a little research on how they voted on Gun Control issues and we pretty much know what will happen if we do not!! So ya know whom ya voted for in the past and chances are their views have not changed, BUT only takes a little diggin to uncover the WORMS! they can flip flop on us with out blinking an eye!! We have a voice in the if/when this issue will pass/fail so pop a letter to your Rep and see where they stand and then double check their positions closely!!

I was reading about after application that ya wanta heat it with hair dryer but not over 150 Degree's, do you do this and then wipe it dry or leave it as is? Was hearing good stuff from lotta Gi's about it being so much better than CLP and that it had a weird property of adhering to metal? Guess i am sold and will order some because benelli oil is quite hard to find in NM, Thanks!!

Hear a lotta people swearing by this lube and wondering if anyone has used it and would they reccomend it?

since this is happening on 2 guns i would lean towards ammo but do a search on "Jamming" and you will probably find that shells that will not cycle ya just do not use? it is unusual for hev-shot to cause problems and i would probably call C/S on that issue!

Just give Briley a call i am sure they can answer any slug question you could dream of and as far as their products, i have heard nothing negative but iam sure someone will have heard something! 1-800-331-5718 Central TZ i have no experience with rifled slug chokes but if ya gotta rifled slug barrell i would expect it would be a rifled slug choke and i have only used the antique smooth bore slugs and they are pretty accurate to a reasonable distance! Hey also check out shotgunworld.com theyhave a slug forum and ya might find something there!!

I have no NVG's and a large cap magazine will stop them also!!

Briley Manufacturing, Gander Mountain, Benelli? list goes on and on

It is just a matter of plain old ENGLISH if ya can read or search for a manual ya pretty much gotter whupped!! Sorry for the poor english i am a native arkanite!! But do wear shoes now and duct tape did not work AH's

I use an American Security and it will not be carried out by a crack head in middle of night , weighs about 850lbs and has numerous guns in it and very happy with quality! check them on the net!! If it gets carried out he might be surprised cause all my guns are not inside it!! Not a cheap walmart grab and run safe this was purchased from a lock and key dealer which sells quality safes and got it at a discount due to last years model and they were closing it out!!