DOOKEY FACE

Looking for an original Benelli M1 Super 90 manual. Anybody got one they want to sell?? PM or e-mail me

Why not sell your gun, and take the $$$ from the sale and buy the gun you want?

Cody, You should post pics.

Just my opinion, but the most recent prices of an M3, in any configuration are ridiculous. Why pay $1500.00 plus for it when the M4 is available for that amount, or a little plus/minus of that amount?? Even the asking prices on an M1 are creeping up near $1200.00.

tagged....

Why do people put pens/markers/pencils through the trigger area like this?

I did long ago and all I found was THIS ONE OUT OF STOCK. If you know of somewhere that has 'em in stock, help a fella out and post a link.

I dunno. There is no movement in mine at all once it locked into the tube groove.

I want one too, but they are out of stock.

No, I meant will a pistol grip stock taken off of an M4, fit on an M3/M1? And vice-versa?

What's the difference between a M3 pistol grip stock, and an M4 pistol grip stock?

I told you you broke it, and to redeem yourself you need to ship that baby to me at once. At this point, the only other thing I can think of is maybe the parts of the bolt that you removed are not assembled correctly. Also try using a cleaning rod to push the spring in the tube to see how far it will go down to eliminate that as the problem.

Benelli makes a collapsible for the Supernova?? Nevermind. I remember the funny curve

Yeah. I think his problem is that the bolt carrier tail is not hitting the spring because it's not lined up properly. You can put the bolt carrier on track at the front of the receiver, but that doesn't indicate the tailend is lined up correctly. If that tail is not lined up, the carrier doesnt go all the way back.

Do as i said. Take the trigger assembly out. Put the bolt in and line up so it hits the recoil spring. You'll see with the trigger assembly out, that the bolt carrier should move the spring inside the tube freely. Put the trigger assembly back on. and continue onto the barrel.

Ok you broke it. your only means of redemption is to ship that baby to me. It looks like your putting the bolt in after the trigger assembly. Take the trigger assembly out, and put the bolt in. Make sure that the bolt carrier tail is hitting/lined up with the recoil spring in the tube. Put the trigger assembly back in afterwards.

e-mail sent

Man...this guy always speaks the truth.

ecross, Listen to Duggan. He's only providing you with good sales tips. Remember, you want to ATTRACT buyers. so providing as much info about the item is essential to the sale (especially since your listing it towards potentials who know a lot about the gun). While some might consider your price high, if you listed the components of the weapon (mag tube type, collapsible/non-collapsible stock, model number, extras, etc) it may be worth it to someone. Uploaded pics would also be helpful too since they tell 1000 words. Once again, we're only trying to help you here.

ditto 4 me!!

This means I'm #3

Good for you. Unfortunately my cashier didn't do half off the total sale. He did half off the 2nd boxes and then forgot to give me my extra $10.00 off for getting the Dick's discount card. Still a good sale tho'.

The limiter is the black piece that is attached to the tube connecting it to the end cap. The piece has threads and it screws off of the tube counter-clockwise.

The black limiter piece screws off counter-clockwise. Like Banjo MD said there may be loktite on it so use a heat gun where it's connected to the tube. Once it's off you'll need to remove the spring fastener at the top of the tube with a small pair of pliers by squeezing the two holes together (watch out because the spring is gonna go flying out) and pulling. Once that's out, put it back flush at the top of the +2 extended piece, put your spring inside the extended piece, push the spring inside the tube with the extender, screw the extender on your tube and....whall-ah.

You shouldn't have to remove the tube to put a +2 extension on. Just unscrew the end cap, unscrew the black limiter piece, screw on the extension, and screw the end cap on the extension.