Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

00stormbringer

Members
  • Posts

    110
  • Joined

  • Last visited

Everything posted by 00stormbringer

  1. [video=youtube_share;mYfA0XpIG08]
  2. http://forums.benelliusa.com/showthread.php/32842-Thinking-of-Getting-a-Benelli-M3-convertible-Post-pics-of-your-M3/page To bad all the images were removed by forum ADM.
  3. Super Nova C-stock will work with newer generation m3's. Surefire m1 light handgaurds will not work. PM forum member heckler&kochp2000, Here is his web site http://www.benelliparts.net/store/c1/Featured_Products.html
  4. The OEM rail has 5 bolts to secure it to the receiver. From the web site's pics, it appears to have only 2 bolts to secure it? Let us know how it holds up over time. Thanks!
  5. I installed an OEM extended safety on my M3; it makes disengaging effortless while not jutting out to Jupiter. http://www.midwestgunworks.com/page/mgwi/prod/60597
  6. What is the minimum depth needed to be drilled out for the stock to fully collapse? Thanks!
  7. Standard Stock https://www.gunpartscorp.com/Products/1432590.htm Tri Rail http://www.midwestgunworks.com/mm5/merchant.mvc?Screen=PROD&Product_Code=81138&Store_Code=mgwi&search=mr1&offset=&filter_cat=&PowerSearch_Begin_Only=&sort=&range_low=&range_high=
  8. Those are almost as bad as those giant GG&G bolt release maxi-pads that end up spinning like a pin-wheel with field use.
  9. I know this is a little off topic, but have you thought about doing something similar with the R1 series of hunting rifles. They would make great DMR's.
  10. How is the partial co-witness: 1/4, 1/3, 1/2, 3/4.... The angle and movement in the video make it difficult to judge the resulting sight picture. Your insight would be greatly appreciated! I'm still on the fence with going to an RMR over my current T-1.
  11. The front barrel clamp came with a surecycle magazine extension. http://www.brownells.com/shotgun-parts/magazine-tube-parts/magazine-tube-extensions/shotgun-magazine-tube-extension-kit-prod23213.aspx The flashlight rail is a GG&G for an 870 that I ground with dremel to fit. I increased the diameter for the magazine tube and ground the top to fit the square barrel junction. It fits solid with no movement. http://www.gggaz.com/remington-870-sling-and-flashlight-combo-mount.html
  12. The FFT M1 (Trigger/Hammer/Disconnector/Follower) works perfectly on my M3 build. The Supernova recoil tube has the same thread pitch as my newer model 11606 M3 receiver.
  13. If it provided a Co-witness with the ghost rings sights, I would buy it in a heart beat. Until then I will stick with a T-1 on a Larue QD. Here is a pic of a Burris Speed Bead Co-witnessing the ghost rings on a Super Nova.
  14. I'll just say that Latino gang violence is pandemic in our adjacent counties. News outlets keep it on the down low as not to hinder tourism.
  15. If your as tall as a hobbit a single point sling is not for you, but I prefer it over 2pt for clearing dwellings.
  16. Here's my CCW when I leave the house. Better to have and not need, then to need and not have.
  17. Each to their own, I always say. My night stand has a Blackhawk pistol belt ready to be buckled on, and a M4 leaning next to my bed ready to be slung. Takes less the 3 seconds to be ready to go, time permitting from my dogs and alarm system. Having a sling allows me to transition to a handgun when necessary without separation from the primary weapon.
  18. The BLAM 4 mount has movement and protrudes further. The AVA is rock solid and places the rail/mount as close as possible to the shotgun.
  19. It is an excellent side saddle; perfect for a bedside shotgun, and it is easy to remove for conventional use.
  20. Thank you for the impossible to find OEM parts to customize my Benelli M3; it was great doing business with you! [ATTACH=CONFIG]2729[/ATTACH][ATTACH=CONFIG]2730[/ATTACH]
  21. I used a heat gun, padded vise, and long handled Philips head screw driver as a T-handle. The end of the false recoil tube has a drainage hole; drill all the way through that hole and out the other end with a bit large enough to accept a screw driver. Apply heat to the receiver & tube junction, and periodically apply turning pressure to the screw driver. Once the Loctite turns to powder, it will unscrew with no chance of damage to the receiver, or false tube. Depending on the temperature setting of the heat gun, it may take any where from 4 to 7 minutes of heating. Using Brute force when gunsmithing is folly.
×
×
  • Create New...