Hardcharger

Yes that would be great I already have the grey CH but looking to get black like a woman with a new pair of shoesssssssss

Yes use the Blue Lock tight 242 you don't need to take the mag tube off once installed just to clean.... the blue comes right off probably with a hair dryer. ( don't use the red or the Green ) than you need heat to take it off with thoes 2. stock it comes with Green lock tight... that's the strongest... set it and forget it. because of you don't and your at the range you going to have to keep on turning that tube just to make it tight again... ( Clean the inner threads before applying the Lock tight ). save your self the problems... http://www.waresdirect.com/products/Commercial-Products/Loctite174;/Threadlockers228485?trackURL=froogle&gclid=CMbfqLOE-rwCFTBk7AodXXgAZw

yea had I knowned how easy it was I took mine to a Marine who is a gun smith and that should have took no more than 5 mins Max 10 mins. he put little heat on it came right off. I am not seeing any problems that I know of. you should be ok try to cycle the gun drop 4 or 5 shells in there and cycle it real fast before you shoot it. (at the range tho). did you use blue locktight 242? when you reinstalled the mag tube? and also there's the plate that goes on the front of the receiver before you install that mag tube. they say drys few hours I let mine sit about a week was not going shooting anyway. let us know how it works out.

lol you know your old lol i did not pay not even half that for mine $900 for a tube. nobody going buy that ****. that's crazy if they think they going to sell that. yea get ready to spend dump load on it as that dam M4 nothing cheap. could not wait till that was over... but on the flip side if it don't say carrier comp on it I don't touch it

I would agree

well first off I would see about that shoulder and see if you did not rip anything I have both that are bad but I can live with it I am 39 and it works for me...

Yea really before somewhere down the line they start some ******** with shotguns you know how it goes Mod it while you can my friend.... tell you this tho if Kip Carrier and Geissele don't have there name on it chances I won't touch it... [h=3][/h][h=3][/h]

think I would buy again from carrier comp extra one to hang on my fricking wall as much as I got a hard on for them. so your doing great job before anyone gets my $$$. Oo-rah

sorry for paper = gun numbers[ATTACH=CONFIG]2342[/ATTACH]

your set up looks same as mine - the rail covers and cylinder Ext you have. you said you had an FTF on the last shell? I am running the carrycomp tube and Wolf spring. do you have the same spring? trying make since why you had an FTF? now I know i had that problem also BUT that was when I first got the gun and was using the OEM spring... I now use the Wolf. do to work has my nuts strapped hard for me to get out and shoot the gun thank you again for the info

I know what the 922 is but my question is I believe I have made this shotgun 922R. it is a Benelli M4 11707. correct me if i am wrong. it has 1 Carriercomp full mag tube 2 Geissele hammer 3 Surefire M80 4 carriercomp follower I also add the OEM collaps stock with pistol grip or would I have to add the freedomfighter trigger and disconnector? I am thinking the trigger and disconnector will put me over the top?

all goooood

not to bad mines cheaper a bit http://www.gunbroker.com/Auction/ViewItem.aspx?Item=372571835 ???

Bumppppppppppp

I have there tube on my M4 and all I can say is Thank you sir for sending it this was 2 years ago when I got mine and put it on. it was about a 5 month wait and ( worth it ) thank you for not raising the prices on some people that still wanted it. everything this guy touched turns to gold. give a Marine some Credit where its do...

bumppppppppp

bumppppppp

bumppppppp

I like it it looks kool. mine i got from Carriecomp so far I have not had any problems with it. I do like the stainless steel on it tho

Selling the OEM tube that came off my Benelli M4 took it off when I first got the shotgun. the Ext is also new though I wanted it but did not use it. went with something else. if looking Email me thanks for asking. 1 $150.00 for the Ext and Free spring 2 $150.00 for the OEM tube [ATTACH=CONFIG]2222[/ATTACH]

I had someone heat up the gun for me at a shop and I put the gun back my self. had I knowned it was easy I would have done it my self. a 2 year old can do it just heat the ( Magtube ) till it starts to turn and smoke than use oven mit with like large wrench go easy on it half inch turns at a time. just make sure when you put it back together to use the bracket that goes in between the tube and the chamber use blue 242 loctite on the threads I wait waited 3 days before I did anything with mine. carriercomp or nothing...............