M2_shootr

I disagree to a point. They should ACCURATELY state how long the product should take to be delivered to the customer following an order. They have a very hard time sticking to this idea. This is the major reason they do not get my business, the product is not good enough to deal with incompetent BS.

Not possible......you will never get a PVS-14 as low as a RMR

Shoot it.......it will smooth out after a few hundred shells. i am a die hard 870 fan. Still love my 870, but the SuperNova is what the 870 would be if designed today.

Seems that are chompin at the bit now..........wonder why?

Proof is in the puddin............buy the original, imitations are just wanna-Bs

I actually ran ran an AR 600 rounds using KY Liquid.......was messy/sloppy, but she never skipped a beat!

Just something to think about........ A friend is a county sheriffs deputy. He only used Mobil 1 to lube and swears by low odor mileral spirits to clean. He has 3700+ rounds through his M4, says he has not had a malfunction to date. with that being said..........is the brand or type of lube/cleaner real that important?

Fireclean or Slip 2000 EWL......that is all I use

Sounds like you need to design, market and manufacture a light mount!

As far as the mount.........for an M4 it doesn't get any better than the AVA! I looked at everything available for over a year.

Many of us have gone that route to replace it with the AVA mount. I have the Surefire E2L, works well for my needs. Many chose a brighter light this is an older 60 lumens model.

Would be very hard to fix a blotched receiver..........

The trigger package is good for the parts count....... the FFT is a good trigger, they may have improved the process since I tried it. they have good CS.....give it a try.

I tried the Nordic pad,......did not like it as much as a buddy's GG&G pad. i found the larger pad to work better for me......also looks better than a tuna can on the side of a M4

Here's a pic of the pieces in question...... http://i30.photobucket.com/albums/c341/faawrenchbndr/Bennelli-M2-3-Gun.jpg

No,....I did not get that. I just feel bad for ya.

Once again.......my apologies about that. They were used on my M4 for a few months until I got the FCG parts installed. It looks as if manufacturing variances are to blame. They for some, but not all M4s.

Then install the FFT and replace it later when the finish goes to shiOt

The Geissele did create a slightly heavier pull, but a crisper break....works for me!

The FFT hammer works well.......I installed it in mine when I first did the 922r. after seeing a bit of wear on the hammer I put a Geissele on order and replaced when it arrived.

Very nice.......thanks! I can't do that with my T1

Would it be possible to get a picture is the sight picture through the RMR?

Outstanding......may have to give this a try. Would be a lower profile than the T1 I have installed now

Wow....very nice. Wonder how long an RMR would handle the abuse of an M4?

7.5 MOA......? Holy crap.......that's huge!