Fullassault

Several options for 922r , CC ti US mag tube, US follower, US Stock, US hand guards, 3 US FCG parts, US trigger housing. If you use the collapsible C stock, and 7rd tube. You have to replace 4 parts and no paperwork required. 922r it’s self is subjective to debate. I’ve saw several conflicting ATF “interpretations” so I guess it applies to whichever letter you follow. As for 922r parts , when replacing parts make sure they are as good or better than you are replacing. the Carrier comp Titanium tube and supplied follower is GTG, the FFT hand guards are acceptable with a little fitting, the aluminum trigger housing is a good option as well. I avoided swapping FCG parts because I’ve heard if issues with some of those. Regardless how ever you choose to approach it there’s an option.

Mine is tight on my m1014

As stated earlier it can be done, it’s relatively easy to swap out. The real question is do you want to wait for the parts at decent price or pay a premium for them more quickly.

You can reuse the old one but you need to know what you are getting into. Recoil tube removal

I have over 1000rds through my 2021 M1014, never had a failure, no QC issues, the chrome in the bore & gas ports looks new. The finish is perfect. Never had a problem with the poly trigger housing but I did swap it out pretty early on for an aluminum one. Positive locking of CH, straight sights, it’s been amazing. Im not saying there isn’t QC issues with new Benellis , just saying some of them are GTG.

Is it actually canted or just not zeroed? Min was off center (not that bad) when I got it. After I zeroed it , it was dead center.

I’m around 1000rds fire on mine. (21 date) and have yet to have any issues

When you manually cycle it, does it feel smooth all the back or do you feel unusual resistance as the bolt travels back at any point? Also are you running the short tube or the full size 7rd tube? My M3 did this with the oem tube , when I added the extension and new spring it worked fine.

1. My M4 literally eats anything so whatever’s available at the time. 2. Don’t shoot slug in my m1014 3. Federal is what I typically use. 4. Same as #2

Not sure mine came like that, did you check yours?

The rear are what come on my m1014. They are luminous. I actually like them better than the mepro night sights (black with no white around the tritium) the luminous sights work better for me in the daylight which is 99% of my shooting time

Be very careful with the front post. The threads are very soft and the nut is lined with polymer. Tighten it just enough so it doesn’t move otherwise you are going to strip it. You might consider a blitzkrieg components front post. They are made of stronger metal.

I’d probably get one

blitzkrieg components

Takes about 15-20 min with a heat gun. There’s a great post on how to from StrangerDanger

I grabbed one, I have a CC tube but I figured it wouldn’t hurt having an OEM back up…. ? yeah that’s really how justified it….

Mine is just under 8 lbs unloaded . CC 7rd ti tube, RMR/ADM combo,KZ charging handle ,factory aluminum trigger housing.

Looks interesting, it has 15% better light transmission and is cheaper but it’s heavier (about 1 oz) & has a little more than half the battery life of a T. I look forward to seeing a review. Not sure I like the button controls, they look small and close together.

I lived on the coast in FL and never had any issues like that. 1st thing I’d do is change the oil you use because it’s not working unless you used your gun as an anchor something. It looks like you have bare metal showing?

Get on the list here. https://www.midwestgunworks.com/page/mgwi/prod/70003

While you look sign up at midway. They get them every few mo.

I get that it’s not perfect and it would definitely mess with your ocd but you have to ask the question “is it really going to make that much difference on a shotgun” and the most important question “does it shoot where you point it”?

You can still occasionally find oem aluminum trigger housings., op nice set! Like others have said oil up 1st otherwise no real break in was necessary for mine.

This was confiscated by the WVA Natural resources police. ? The post…. “There have been several incidents involving illegal hunting in recent weeks in District 1. Some of the cases from Sgt. Spangler’s area are as follows: On October 23rd, two hunters were charged in the Pleasant Valley area by Officers Kocsis and France for various hunting violations during early antlerless deer season, including hunting without licenses, no antlerless stamp, and no blaze orange. Other cases are pending related to spotlighting, Illegal possession, and hunting without license. On October 29th, Officer Prickett and Sgt. Spangler received a complaint about a possible illegal deer kill in the Galloway area of Barbour County. Upon investigation, it was determined that a 10-point buck had been killed with a 30-06 rifle that was checked in as an archery kill. The shooter also discharged the firearm within 500 feet of several houses, and the buck was across the creek on a neighboring property. On October 26th , Officer Rumney received information of an illegal buck kill in Clarksburg. It was determined the individual had illegally killed the deer within city limits and committed several DNR violations. On Friday, November 5th, Officer Rumney and Sgt. Spangler were patrolling the Wallace area of Harrison County around 9:30pm and encountered two subjects walking in the roadway, one of which was fully camouflaged and carrying a loaded sawed-off shotgun with three flashlights attached to it. The subject with the gun attempted to conceal it along the roadway. Investigation revealed that the subject was a convicted felon and prohibited to possess the firearm. The subject was arrested pursuant to the firearms charges and drug paraphernalia. Officer Dudley and Corporal Ozalas have had several calls in Tucker County as well. One case involved a nonresident and a resident who shot a deer with a crossbow from the road. Several other complaints were received and are still being investigated related to shots fired at night and illegally killed deer carcasses that were found by landowners. Night-time patrols have resulted in several other charges including uncased crossbows and hunting after legal hours by Officers Rumney and Kocsis. On November 12th, Officer Rumney, Officer France, and Officer Kocsis were patrolling the Adamsville area of Harrison County. During that patrol, Officer Rumney arrested an individual for DUI 2 nd Offense. In the cases above, citations/charges are pending in the respective Courts. Many of the violations that are encountered are only successfully prosecuted with the assistance of good witnesses. If you observe game violations, please contact your local DNR office or 911 center. “

Got a 2021 1014, is very smooth