Fullassault

The rear are what come on my m1014. They are luminous. I actually like them better than the mepro night sights (black with no white around the tritium) the luminous sights work better for me in the daylight which is 99% of my shooting time

Be very careful with the front post. The threads are very soft and the nut is lined with polymer. Tighten it just enough so it doesn’t move otherwise you are going to strip it. You might consider a blitzkrieg components front post. They are made of stronger metal.

I’d probably get one

blitzkrieg components

Takes about 15-20 min with a heat gun. There’s a great post on how to from StrangerDanger

I grabbed one, I have a CC tube but I figured it wouldn’t hurt having an OEM back up…. ? yeah that’s really how justified it….

Mine is just under 8 lbs unloaded . CC 7rd ti tube, RMR/ADM combo,KZ charging handle ,factory aluminum trigger housing.

Looks interesting, it has 15% better light transmission and is cheaper but it’s heavier (about 1 oz) & has a little more than half the battery life of a T. I look forward to seeing a review. Not sure I like the button controls, they look small and close together.

I lived on the coast in FL and never had any issues like that. 1st thing I’d do is change the oil you use because it’s not working unless you used your gun as an anchor something. It looks like you have bare metal showing?

Get on the list here. https://www.midwestgunworks.com/page/mgwi/prod/70003

While you look sign up at midway. They get them every few mo.

I get that it’s not perfect and it would definitely mess with your ocd but you have to ask the question “is it really going to make that much difference on a shotgun” and the most important question “does it shoot where you point it”?

You can still occasionally find oem aluminum trigger housings., op nice set! Like others have said oil up 1st otherwise no real break in was necessary for mine.

This was confiscated by the WVA Natural resources police. ? The post…. “There have been several incidents involving illegal hunting in recent weeks in District 1. Some of the cases from Sgt. Spangler’s area are as follows: On October 23rd, two hunters were charged in the Pleasant Valley area by Officers Kocsis and France for various hunting violations during early antlerless deer season, including hunting without licenses, no antlerless stamp, and no blaze orange. Other cases are pending related to spotlighting, Illegal possession, and hunting without license. On October 29th, Officer Prickett and Sgt. Spangler received a complaint about a possible illegal deer kill in the Galloway area of Barbour County. Upon investigation, it was determined that a 10-point buck had been killed with a 30-06 rifle that was checked in as an archery kill. The shooter also discharged the firearm within 500 feet of several houses, and the buck was across the creek on a neighboring property. On October 26th , Officer Rumney received information of an illegal buck kill in Clarksburg. It was determined the individual had illegally killed the deer within city limits and committed several DNR violations. On Friday, November 5th, Officer Rumney and Sgt. Spangler were patrolling the Wallace area of Harrison County around 9:30pm and encountered two subjects walking in the roadway, one of which was fully camouflaged and carrying a loaded sawed-off shotgun with three flashlights attached to it. The subject with the gun attempted to conceal it along the roadway. Investigation revealed that the subject was a convicted felon and prohibited to possess the firearm. The subject was arrested pursuant to the firearms charges and drug paraphernalia. Officer Dudley and Corporal Ozalas have had several calls in Tucker County as well. One case involved a nonresident and a resident who shot a deer with a crossbow from the road. Several other complaints were received and are still being investigated related to shots fired at night and illegally killed deer carcasses that were found by landowners. Night-time patrols have resulted in several other charges including uncased crossbows and hunting after legal hours by Officers Rumney and Kocsis. On November 12th, Officer Rumney, Officer France, and Officer Kocsis were patrolling the Adamsville area of Harrison County. During that patrol, Officer Rumney arrested an individual for DUI 2 nd Offense. In the cases above, citations/charges are pending in the respective Courts. Many of the violations that are encountered are only successfully prosecuted with the assistance of good witnesses. If you observe game violations, please contact your local DNR office or 911 center. “

Got a 2021 1014, is very smooth

??

Yes, got it for $11 on eBay. I originally got it just to keep spare ammo in when hiking but it actually works pretty well on your side.

It’s ok, not quite as innovative as their scope mounts. It seems to return to zero fine and mounts solid. it’s very similar to an ADM mount. Bobro is still my go to mount.

I’ve owned several RSA’s over the years they have held up very well. True they are made of carbon composite & titanium vs aluminum but will take abuse. They were originally part of the German IdZ program. It has a few points over aimpoint . no POA shift when using a cowitness , solar backup and it’s extremely light. The AP is aluminum, has aftermarket support and is less complicated. They both are combat tested, both have battery life in the years and both are well made. Can’t go wrong with either.

I use one of these.

I’ve actually got some of the best deals I’ve ever found in the ArF EE. I once got a like new pristine FNC for $1600. I actually PMed the guy to tell him what he had and what it was worth. He said he was a lawyer doing an estate sale and that was his asking price. I claimed it and the next person in line PMed me and offered $4.5k Needless to say, I became the proud but brief owner of a FNC. ? I’ve also saw one of the rarest Arsenal AKs sell for $1200 (these go for INSANE $) because they were a special run of 25 for a movie and what was left of them found their way to the market. Again I told the guy what he had but someone already ripped his arm off the take it!

No, mine wasn’t. It had the one position extension but I could push the button and and collapse it without locking and I could remove it.

No, I like having easy access to mine. Besides it’s pretty much fixed on as long the cap it on the end.

pretty painless swap. The TG goes in much easier now, the safety is 2x as loud and has a more sold feel. Not sure it was a necessity but I’d do it again! ?

Was just delivered! ?